Fairgrounds in Oklahoma With Floor Plans

The fairgrounds in Oklahoma that most vendor show and expo organizers shortlist are in the two big metros. Oklahoma City has a large fairgrounds campus west of downtown with expo buildings of many sizes, and Tulsa has Expo Square, home of the SageNet Center exhibit building. Northeast of Tulsa, Claremore has its own expo center. Below are Oklahoma fairgrounds buildings that already have ready-made floor plans in Map D's Venue Library, linked to their venue pages so you can open a plan and start your vendor layout. First, here is how to choose a fairground building for a vendor show, expo, fair or market, and how to plan around storms and heat.
Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications, so confirm every measurement, door and utility location with the venue before you sell a single space. If you need a downtown convention hall instead, see convention centers in Oklahoma.
How to Choose an Oklahoma Fairground for Your Event
Fairgrounds suit events that need big floors, drive-in doors and lots of free or cheap parking: gun and knife shows, home and garden shows, boat and RV shows, farm and equipment shows, craft fairs, collector shows, rodeos and livestock events. The rental may cover less than a convention center does, so compare what is included as well as the rent.
1. Size the Show Before You Tour
Count vendor spaces by size, then add aisles, food, stages, restrooms, first aid and the show office. The exhibit hall size calculator turns a vendor mix into the gross space you need. Treat the result as a planning assumption to check against the fire marshal's rules.
- Plan used: Expo Square in Tulsa, drawn at about 388 x 215 feet, or roughly 83,400 square feet gross.
- At about half for vendor spaces: roughly 41,700 square feet.
- Vendor mix example: 350 spaces of 10 x 10 feet (35,000 square feet) plus 10 spaces of 10 x 20 feet (2,000 square feet) uses about 37,000 square feet, leaving room for a food court and a stage.
- Compare: The OKC Fairgrounds Hobbies, Arts and Crafts Building plan is drawn at about 185 x 175 feet, or roughly 32,400 square feet. At the same ratio, that is room for roughly 160 spaces of 10 x 10 feet on paper. Ask the venue what the drawing covers, because it may include space outside the hall itself.
2. Exhibit Buildings, Arenas and Outdoor Lots
- Exhibit or expo building: Best for vendor shows, craft fairs, gun shows, collector shows and consumer expos. Ask whether it is heated and air conditioned on your dates, including setup days.
- Arena or livestock complex: Dirt or concrete floors for rodeos, horse shows, livestock shows and equipment demos. Ask about the floor surface, stalls, wash racks and lighting.
- Outdoor lots and midways: Good for food trucks, carnival rides, equipment displays and overflow vendors. Ask about surface, power pedestals and drainage after a heavy rain.
3. Load-In, Parking and RVs
Ask how vendors reach each building, how many drive-in doors there are, where trailers park and how long the setup window is. Many Oklahoma vendors travel the show circuit with trailers and RVs, so ask whether they can stay on site and whether hookups are included. Write a vendor load-in schedule once you have the answers, and size attendee parking with the event parking calculator.
4. Power and Water
Food vendors, demo booths and carnival operators need power, and many need water. Mark power drops, pedestals and water hookups on the plan before you number spaces, and charge for power as a separate line on the vendor application so you know who needs it. The event power calculator helps you total the load.
5. Aisle Widths and Fire Code
Fairground buildings still need a code-compliant layout. Keep exits clear, check your trade show aisle width, mark fire equipment on the plan and review the fire marshal floor plan requirements before you submit. Outdoor layouts need clear lanes for emergency vehicles too.
6. Storms, Heat and the Fair Calendar
Oklahoma's spring brings severe storms, hail and tornado warnings. Ask each venue where attendees and vendors shelter, publish a weather contact and a decision deadline, and write the shelter plan into the vendor packet. Summer heat is hard on buildings without air conditioning and on outdoor lots, so plan shade, water and cooling. Both big grounds also host major fall fairs, the Oklahoma State Fair in Oklahoma City and the Tulsa State Fair at Expo Square, plus rodeos, horse shows and other large events, so ask which campus events overlap your dates, move-in and move-out.
Questions to Ask an Oklahoma Fairground Before You Sign
Use this list on site visits, and see our full list of questions to ask an event venue for contract terms and costs.
- Which buildings, arenas and outdoor lots does the rental include, and can you send a current plan with dimensions?
- Is the building heated and air conditioned on our dates, including setup and teardown days?
- Where are the doors, power drops, water hookups and restrooms, and which areas must stay clear?
- Where do attendees and vendors shelter during a tornado warning, and who makes the call?
- Where do vendor trucks, trailers and RVs park, and are hookups included?
- Which services are exclusive to the venue, such as food, security, cleaning or electrical?
- What other events are on the grounds on our dates, and how will gates, parking and freight routes be shared?
- What insurance and certificates do you require from us and from our vendors?
Oklahoma City Fairgrounds
The Oklahoma City fairgrounds have gone by several names, including State Fair Park and OKC Fairgrounds, and the official website now calls the campus OKC Fair Park. The library has several listings for the same buildings under the older names, at different sizes, so open the one that matches the building in your contract.
- [OKC Fairgrounds - Bennett Event Center](/venues/okc-fairgrounds-bennett-event-center-oklahoma-city/), Oklahoma City: the drawn plan spans about 682 x 554 feet. The campus's large expo building, which suits big consumer shows, equipment shows, boat and RV shows and multi-hall vendor events. A drawing this size likely covers more than one hall, so trim it to the space you rent.
- [OKC Fairgrounds - Hobbies, Arts, and Crafts Building](/venues/okc-fairgrounds-hobbies-arts-and-crafts-building-oklahoma-city/), Oklahoma City: the drawn plan spans about 185 x 175 feet. A smaller building that suits craft fairs, collector shows, club shows and regional vendor markets.
Expo Square, Tulsa
Expo Square is Tulsa's fairgrounds, on East 21st Street. Its own site lists exhibit facilities including the SageNet Center, the Exchange Center, Central Park Hall and the Pavilion, so ask which building each library drawing covers.
- [SageNet Center](/venues/sagenet-center-tulsa/), Tulsa: the drawn plan spans about 813 x 463 feet. A big clearspan exhibit building that suits large consumer, boat, gun and farm shows. A plan this large suits a show of several hundred vendors; ask which sections your rental includes.
- [Expo Square](/venues/exposition-square-tulsa/), Tulsa: the drawn plan spans about 388 x 215 feet, and the venue page lists a second plan. Match the drawing to the specific Expo Square building in your contract before you size your show.
Claremore Expo
- [Claremore Expo](/venues/claremore-exposition-claremore/), Claremore: the drawn plan spans about 269 x 220 feet. An expo center northeast of Tulsa that suits regional trade shows, home shows, livestock and ag events and community fairs. Compare it with the Tulsa buildings when your dates or your vendor count do not fit Expo Square.
How to Start a Layout From a Venue Library Plan
Each venue page in the Map D venue directory shows the plans drawn for that building, with dimensions in feet and a preview.
- Open the venue and choose the listing and plan closest to the building you will rent.
- Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
- Trim a large campus drawing to your building, check it against the venue's current plan, and add outdoor lots, tents and gates as needed.
- Block out entrances, the show office, food, restrooms, first aid, shelter routes and fire equipment clearances.
- Lay out numbered vendor spaces and aisles in standard sizes, with corner and end spots marked.
- Price spaces by size and location, mark which have power, and hold spots for returning vendors.
- Send the layout to the venue and the fire marshal before vendor sales open.
Running a fair or a multi-day festival on the grounds? Map D for county fairs covers vendor applications, stall sales and the public map, and festival management software covers sponsors and tickets. For costs, see how much it costs to rent a fairground and county fair vendor fees, and for other states, fairgrounds in Texas and fairgrounds in Oregon.
Common Mistakes When Renting an Oklahoma Fairground
- Laying out vendor spaces on a whole-campus drawing instead of the building you rent.
- Opening the wrong listing when a building, like the Bennett Event Center, has several plans drawn at different sizes.
- Leaving the tornado shelter plan out of the vendor packet.
- Booking a building without confirming air conditioning for summer dates or heat for winter dates.
- Choosing dates that overlap a fair, rodeo or other big campus event that fills parking and freight routes.
- Selling vendor spaces before the fire marshal has reviewed the layout.
Where Map D Fits
Map D is floor plan and booth sales software for organizers. You open a venue plan, then add vendor spaces, aisles, stages and labels in the editor, and publish an interactive map that vendors and guests can use. For fairs, festivals and markets, Map D Festivals & Markets is $0 a month, with a 3.9% Map D fee on booth, stall and sponsor sales, plus $0.75 per paid ticket, on top of standard card processing (Stripe, 2.9% + $0.30), and it includes free map migration within 48 hours. For trade shows and expos on the grounds, you can build the floor plan for one event free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own event, request a demo or build a free floor plan.
FAQ
Which fairgrounds in Oklahoma have floor plans in Map D's Venue Library?
At the time of writing, the library has plans for the Oklahoma City fairgrounds, including the Bennett Event Center and the Hobbies, Arts & Crafts Building, for Expo Square and its SageNet Center in Tulsa, and for the Claremore Expo. It is not a complete list of every fairground in Oklahoma.
Are the floor plan dimensions in this article official?
No. The dimensions describe the plans drawn in Map D's Venue Library. They are a useful starting point for sketching a layout, but confirm building sizes, doors, columns, utilities and outdoor areas with the venue before you sell a single space.
When is the best time to hold an event at an Oklahoma fairground?
Many organizers aim for late fall through early spring indoors, avoiding the weeks around each grounds' own fair. Spring brings severe storms and tornado warnings, and summer heat is hard on buildings without air conditioning and on outdoor lots. Ask which buildings are heated and cooled on your dates, and which big campus events overlap them.
How much does it cost to rent a fairground in Oklahoma?
Costs depend on the buildings, outdoor space, days and services you need, so ask each venue for a written quote and its current rate sheet. Our guide on how much it costs to rent a fairground lists the line items to compare, including building rent, setup days, utilities, security, cleaning, parking and insurance.

