Skip to main content

Convention Centers in Oklahoma With Plans

By: Map D
Published: November 16, 2026
Updated November 17, 2026
Tags: trade showsevent planningevent organizerShow Management Tips
Convention Centers in Oklahoma With Plans

Most convention centers in Oklahoma that organizers shortlist sit in two metros. Oklahoma City has a downtown convention center and a large fairgrounds campus with expo buildings. Tulsa has a downtown convention hall and the Expo Square fairgrounds, with Claremore close by. Below are the Oklahoma venues that already have ready-made floor plans in Map D's Venue Library, grouped by city and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to choose between a downtown hall and a fairgrounds building.

Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth.

Downtown Convention Center or Fairgrounds Expo Building?

Oklahoma gives trade show and expo organizers a real choice of venue type in both big metros. Each type changes your costs, your exhibitors' load-in and the kind of attendee you draw, so settle on the type before you compare individual buildings.

  • Downtown convention center: Concrete exhibit floors, loading docks, meeting rooms and nearby hotels. A good fit for association shows and conferences with an exhibit floor, where attendees stay for two or three days.
  • Fairgrounds expo building: Large open floors, drive-in doors and big parking lots. A good fit for home shows, gun shows, RV and boat shows, equipment shows and consumer expos where attendees drive in for the day.
  • Hotel exhibit space: Carpeted ballrooms with airwalls and lower ceilings, often with a food and beverage minimum and a room block. A good fit for a conference with a tabletop expo or a sponsor area.

If your exhibitors bring vehicles, trailers or heavy machinery, start with the fairgrounds buildings and ask about drive-in doors and floor load. If your show is a conference first and an expo second, start downtown.

Worked Example: Will Your Show Fit?

Start with the booths you expect to sell, then add aisles, registration, food, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout and the fire marshal's rules.

  • Plan used: The Cox Business Center in Tulsa, drawn at about 347 x 243 feet, or roughly 84,300 square feet gross.
  • At 45 percent for booths: roughly 37,900 square feet.
  • Booth mix example: 300 booths of 10 x 10 feet (30,000 square feet) plus 10 islands of 20 x 20 feet (4,000 square feet) uses about 34,000 square feet, leaving some room for a lounge or demo stage.
  • Check: If your show needs 400 or more booths, this plan is tight, and a larger drawing such as the SageNet Center plan in Tulsa or the Oklahoma City Convention Center plan is worth a look.

These are planning assumptions, not venue capacities. Run your own mix in the exhibit hall size calculator, and see standard trade show booth sizes before you set your booth menu.

Questions to Ask an Oklahoma Venue Before You Sign

Use this list on site visits, and see our full list of questions to ask an event venue for contract terms and costs.

  1. Which hall or building is in our contract, and can you send a current CAD or PDF plan of it?
  2. Where are columns, exits, airwalls, floor ports and fire equipment, and which areas must stay clear?
  3. How many docks or drive-in doors serve our space, and can exhibitors drive vehicles onto the floor?
  4. Which services are exclusive to the venue, such as electrical, internet, food, cleaning and security, and what do they cost?
  5. What other events share the campus on our dates, and how will parking, docks and signage be split?
  6. How long are move-in and move-out, and are those days charged as rent?
  7. What is the severe weather plan, where do attendees shelter, and who decides whether to delay doors?
  8. Is there a room block or food and beverage minimum, and what are the attrition terms?

Oklahoma City Convention and Expo Venues

Oklahoma City has the most choice in the library for the state. Several listings are drawn for the downtown convention center and the fairgrounds, at different sizes and for different halls, so check which halls your contract names before you open a plan.

  • [Oklahoma City Convention Center](/venues/oklahoma-city-convention-center-oklahoma-city/), Oklahoma City: the drawn plan spans about 651 x 401 feet. The library also has separate listings with plans titled "Halls A-B" (about 313 x 326 feet) and "Hall A" (about 374 x 224 feet), so ask the venue which drawing matches the halls you rent.
  • [Bennett Event Center - State Fair Park](/venues/bennett-event-center-state-fair-park-oklahoma-city/), Oklahoma City: the drawn plan spans about 826 x 1120 feet. Other listings for the same building are drawn at different sizes, including one of about 682 x 554 feet. A drawing this large likely covers more than one hall, so trim it to the space you rent.
  • [OKC Fairgrounds - Hobbies, Arts, and Crafts Building](/venues/okc-fairgrounds-hobbies-arts-and-crafts-building-oklahoma-city/), Oklahoma City: the drawn plan spans about 185 x 175 feet. A smaller fairgrounds building that suits craft fairs, collector shows and regional expos.
  • [Hall C & D](/venues/hall-c-and-d-oklahoma-city/), Oklahoma City: the drawn plan spans about 357 x 400 feet. The listing does not name the building, so match it against the hall names in your contract.
  • [The Omni Hotel](/venues/omni-hotel-oklahoma-city/), Oklahoma City: the drawn plan spans about 190 x 165 feet. Hotel exhibit space for a conference with a sponsor area or tabletop expo.

Tulsa and Northeast Oklahoma

Tulsa splits between a downtown convention hall and the Expo Square fairgrounds. The fairgrounds listings are a natural starting point for consumer shows and big-floor expos, while the downtown hall suits conferences with an exhibit floor.

  • [Cox Business Center](/venues/cox-business-center-tulsa/), Tulsa: the drawn plan spans about 347 x 243 feet. A downtown option for association shows and conferences.
  • [SageNet Center](/venues/sagenet-center-tulsa/), Tulsa: the drawn plan spans about 813 x 463 feet. A large plan that suits big consumer and equipment shows. Ask which sections the drawing covers.
  • [Expo Square](/venues/exposition-square-tulsa/), Tulsa: the drawn plan spans about 388 x 215 feet. Check how this listing relates to the specific Expo Square building in your contract.
  • [Ruffin Event Center](/venues/ruffin-event-center-tulsa/), Tulsa: the drawn plan spans about 244 x 411 feet.
  • [Claremore Expo](/venues/claremore-exposition-claremore/), Claremore: the drawn plan spans about 269 x 220 feet. An option for regional shows northeast of Tulsa.

Plan Around Spring Storms and Big Event Weeks

Oklahoma's spring brings severe storms and tornado warnings, and summer can be very hot on the docks. Publish a weather contact and a decision deadline for exhibitors, ask where attendees shelter, and keep outdoor registration lines short. Fairgrounds campuses also host fairs, rodeos and other big events, so ask which campus events overlap your dates and move-in days, and how parking and freight routes will be shared.

How to Start a Layout From a Venue Library Plan

Starting from a drawn plan saves the hours it takes to trace a hall from a PDF. Each venue page in the Map D venue directory shows the plans drawn for that building, their dimensions in feet and a preview.

  1. Open the venue and choose the listing and plan that match the hall in your contract.
  2. Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
  3. Trim a large fairgrounds or campus drawing down to the halls you rent, then check walls, columns and doors against the venue's current plan.
  4. Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
  5. Lay out booths and aisles in standard sizes and number them in a logical order.
  6. Mark sponsor spots, price booths by size and location, and hold space for returning exhibitors.
  7. Send the layout to the venue and the fire marshal for review before you open booth sales.

For rent, labor and service charges, see how much it costs to rent a convention center. Comparing cities across the region? See the companion list of convention centers in Texas.

Common Mistakes When Picking an Oklahoma Venue

  • Opening the wrong listing when a venue, like the Oklahoma City Convention Center or the Bennett Event Center, has several plans drawn for different halls.
  • Laying out booths on a whole-campus fairgrounds drawing instead of the building you rent.
  • Choosing dates that overlap a big fairgrounds event that fills parking and freight routes.
  • Leaving the severe weather plan out of the exhibitor manual.
  • Selling booths before the fire marshal has reviewed the layout.

Where Map D Fits

Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the editor. When the layout is ready, a paid plan lets you publish an interactive map, share it with exhibitors and sell booths online, with exhibitors choosing their own booth at checkout. Event floor plan software gives you one to-scale plan that the venue, the fire marshal, exhibitors and staff all review, instead of trading marked-up PDFs. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.

FAQ

Which convention centers in Oklahoma have floor plans in Map D's Venue Library?

At the time of writing, the library has plans for the Oklahoma City Convention Center, the Bennett Event Center at the OKC Fairgrounds, the Cox Business Center, Expo Square and the SageNet Center in Tulsa, and Claremore Expo, plus a few other halls and a hotel. It is not a complete list of every venue in the state.

Are the floor plan dimensions in this article official?

No. The dimensions describe the plans drawn in Map D's Venue Library and are approximate. They are a useful starting point for sketching a layout, but confirm hall sizes, columns, doors, ceiling heights and utilities with the venue before you sell a single space.

Should an Oklahoma trade show pick a downtown convention center or a fairgrounds building?

It depends on your exhibitors and attendees. A downtown hall suits multi-day association shows with sessions and hotel stays. A fairgrounds expo building suits consumer, equipment and vehicle shows that need drive-in doors, open floors and large parking lots. Compare freight access, exclusive services and total cost, not rent alone.

How do I start a floor plan for a Oklahoma venue in Map D?

Open the venue page in the Map D venue directory, pick the plan you want, select Use This Floor Plan Free and create a free account. The plan opens in the editor, where you can add booths, aisles and labels. Building the floor plan for one event is free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499.