Skip to main content

Convention Centers in New Jersey With Plans

By: Map D
Published: November 16, 2026
Updated November 17, 2026
Tags: trade showsevent planningevent organizerShow Management Tips
Convention Centers in New Jersey With Plans

Most convention centers in New Jersey that organizers shortlist fall into three groups: Atlantic City, with a convention center and several casino resorts with event space; the exposition centers in North and Central Jersey, in Secaucus near the Meadowlands and in Edison; and event centers in Monmouth County, such as Freehold and Holmdel. Below are the New Jersey venues that already have ready-made floor plans in Map D's Venue Library, grouped by region and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to choose between a shore destination and a commuter-friendly expo hall.

Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth.

Shore Destination or Commuter Expo Hall?

New Jersey shows tend to draw from two very different audiences. Some pull attendees who travel in and stay for a few days. Others pull attendees from the New York and Philadelphia metro areas who drive in for one day. The venue type should match the audience you expect.

  • Atlantic City convention center or resort: A destination with hotel rooms, dining and entertainment close by. A good fit for association meetings and multi-day shows. Expect room blocks, food and beverage minimums and in-house services.
  • North or Central Jersey exposition center: Open exhibit floors near major highways, with parking for attendees who drive in. A good fit for consumer shows, trade expos and one- or two-day events aimed at the New York and New Jersey metro area.
  • Event center or converted campus: Flexible floors for regional expos, career fairs, makers markets and corporate events. Check freight access, power and ceiling heights before you plan heavy exhibits.

If most exhibitors and attendees live within driving distance, a North or Central Jersey hall usually saves them a hotel night. If your show is a conference first, Atlantic City puts rooms, sessions and booths close together.

Worked Example: Will Your Show Fit?

Start with the booths you expect to sell, then add aisles, registration, food, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout and the fire marshal's rules.

  • Plan used: The New Jersey Convention & Exposition Center in Edison, drawn at about 237 x 396 feet, or roughly 93,900 square feet gross.
  • At 45 percent for booths: roughly 42,200 square feet.
  • Booth mix example: 350 booths of 10 x 10 feet (35,000 square feet) plus 12 islands of 20 x 20 feet (4,800 square feet) uses about 39,800 square feet, leaving some room for a lounge or demo stage.
  • Compare: The Meadowlands Exposition Center plan in Secaucus is drawn at about 408 x 227 feet, or roughly 92,600 square feet gross, so the same booth mix is worth testing there too before you decide on location.

These are planning assumptions, not venue capacities. Run your own mix in the exhibit hall size calculator, and see how to plan a trade show for the full timeline from venue to show day.

Questions to Ask a New Jersey Venue Before You Sign

Use this list on site visits, and see our full list of questions to ask an event venue for contract terms and costs.

  1. Which hall, ballroom or section is in our contract, and can you send a current CAD or PDF plan of it?
  2. Where are columns, exits, airwalls, floor ports and fire equipment, and which areas must stay clear?
  3. How does freight reach the floor, how many docks serve our space, and is there a marshaling yard for trucks?
  4. Which services are exclusive, such as electrical, internet, food, cleaning, security and labor, and what do they cost?
  5. Is there a room block or food and beverage minimum, and what are the attrition terms and cut-off date?
  6. What other events share the building or resort on our dates, and how will docks, parking and signage be split?
  7. How long are move-in and move-out, and are those days charged as rent?
  8. What is the plan if a winter storm affects move-in or show days, and who decides whether to delay?

Atlantic City Convention and Resort Venues

Atlantic City has the most listings in the library for New Jersey. The convention center plan in the library is drawn at a modest size, so ask which hall or section it covers before you rely on it for a large show.

  • [Atlantic City Convention Center](/venues/atlantic-city-convention-center-atlantic-city/), Atlantic City: the drawn plan spans about 139 x 251 feet. Ask the venue which hall the drawing covers and request plans for any additional halls you rent.
  • [Borgata Hotel & Casino](/venues/borgata-hotel-and-casino-atlantic-city/), Atlantic City: the drawn plan spans about 235 x 194 feet. Resort event space for conferences with a sponsor area or exhibit floor.
  • [Harrah's Resort](/venues/harrah-s-resort-atlantic-city/), Atlantic City: the drawn plan spans about 102 x 216 feet. The library has another listing for the same resort drawn at a different size, so match the plan to the rooms in your contract.
  • [Bally's Atlantic City](/venues/bally-s-atlantic-city-atlantic-city/), Atlantic City: the drawn plan spans about 142 x 138 feet. A smaller resort space for tabletop expos and sponsor areas.

North Jersey and the Meadowlands

Secaucus sits close to New York City, which makes it a common choice for shows that want a metro audience without Manhattan prices and logistics.

  • [Meadowlands Exposition Center](/venues/meadowlands-exposition-center-secaucus/), Secaucus: the drawn plan spans about 408 x 227 feet. A separate listing with a plan titled for Expo Hall 1 is drawn at about 433 x 238 feet, so check which hall your contract names.
  • [Venetian](/venues/venetian-garfield/), Garfield: the drawn plan spans about 158 x 152 feet. An event venue for smaller expos, sponsor showcases and banquets with vendor tables.

Central Jersey and Monmouth County

  • [New Jersey Convention & Exposition Center](/venues/new-jersey-convention-and-exposition-center-edison/), Edison: the drawn plan spans about 237 x 396 feet. A Central Jersey option for consumer shows and trade expos that draw from both the New York and Philadelphia areas.
  • [The Event Center at iPa](/venues/event-center-at-ipa-freehold/), Freehold: the drawn plan spans about 303 x 175 feet. The library has other listings for this venue drawn at slightly different sizes, so match the plan to the space you rent.
  • [Bell Works](/venues/bell-works-holmdel/), Holmdel: the drawn plan spans about 181 x 159 feet. A converted campus that suits corporate expos, tech events and makers markets.

Plan Around Shore Season and Winter Weather

Summer weekends bring heavy traffic to the shore, which can slow exhibitor freight and raise hotel rates in Atlantic City. Winter storms can disrupt move-in across the state. Before you lock dates, ask the venue which large events overlap yours, and publish a weather contact and a decision deadline for exhibitors. In North Jersey, also check for big stadium events nearby that compete for parking and highway access.

How to Start a Layout From a Venue Library Plan

Starting from a drawn plan saves the hours it takes to trace a hall from a PDF. Each venue page in the Map D venue directory shows the plans drawn for that building, their dimensions in feet and a preview.

  1. Open the venue and choose the listing and plan that match the hall or ballroom in your contract.
  2. Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
  3. Check the drawing against the venue's current plan and fix walls, columns, doors and service areas.
  4. Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
  5. Lay out booths and aisles in standard sizes and number them in a logical order.
  6. Mark sponsor spots, price booths by size and location, and hold space for returning exhibitors.
  7. Send the layout to the venue and the fire marshal for review before you open booth sales.

For rent, labor and service charges, see how much it costs to rent a convention center. Comparing nearby states? See the companion lists of convention centers in New York and convention centers in Pennsylvania.

Common Mistakes When Picking a New Jersey Venue

  • Using a single-hall drawing to plan a show that will spill into a second hall.
  • Comparing a resort ballroom with an exposition hall without adding food and beverage minimums and service charges.
  • Booking shore dates on busy summer weekends without checking exhibitor freight times and hotel rates.
  • Ignoring labor and exclusive service rules when you budget exhibitor costs.
  • Selling booths before the fire marshal has reviewed the layout.

Where Map D Fits

Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the editor. When the layout is ready, a paid plan lets you publish an interactive map, share it with exhibitors and sell booths online, with exhibitors choosing their own booth at checkout. Trade show management software keeps the floor plan, booth sales and exhibitor details in one place, so the venue, exhibitors and staff all work from the same layout instead of trading marked-up PDFs. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.

FAQ

Which convention centers in New Jersey have floor plans in Map D's Venue Library?

At the time of writing, the library has plans for the Atlantic City Convention Center, the New Jersey Convention & Exposition Center in Edison, the Meadowlands Exposition Center in Secaucus and The Event Center at iPa in Freehold, plus Atlantic City resort spaces and a few other event venues. It is not a complete list of every venue in the state.

Are the floor plan dimensions in this article official?

No. The dimensions describe the plans drawn in Map D's Venue Library and are approximate. They are a useful starting point for sketching a layout, but confirm hall sizes, columns, doors, ceiling heights and utilities with the venue before you sell a single space.

Is an Atlantic City resort a good choice for a New Jersey trade show?

It can be for a conference or association meeting with a sponsor area or a tabletop expo, since sessions, meals, rooms and exhibits sit under one roof. Check ceiling heights, floor load, freight access through service corridors, the food and beverage minimum and the room block attrition terms before you compare it with a convention or exposition hall.

How do I start a floor plan for a New Jersey venue in Map D?

Open the venue page in the Map D venue directory, pick the plan you want, select Use This Floor Plan Free and create a free account. The plan opens in the editor, where you can add booths, aisles and labels. Building the floor plan for one event is free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499.