Convention Centers in Missouri With Plans

Most convention centers in Missouri that organizers shortlist sit at the two ends of the state. Kansas City, on the Kansas line, has a downtown convention center with several exhibit halls, a large expo complex and hotels with exhibit space. St. Louis, on the Illinois line, has a downtown convention center, a historic station venue, hotels with ballrooms and a convention center in St. Charles. Below are the Missouri venues that already have ready-made floor plans in Map D's Venue Library, grouped by metro and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to choose between a downtown hall and a hotel or expo complex.
Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth.
Downtown Hall, Expo Complex or Hotel Ballroom?
Both Missouri metros give organizers a choice of venue type. Each changes your costs, your exhibitors' load-in and the kind of attendee you draw, so decide which type fits your show before you compare individual buildings.
- Downtown convention center: Concrete exhibit floors, docks, meeting rooms and nearby hotels. A good fit for association shows and multi-day trade shows. Expect exclusive services, labor rules and hotel room blocks.
- Expo complex or event center: Large open floors, drive-in access in some buildings and big parking lots. A good fit for consumer shows, equipment shows and expos where attendees drive in for the day.
- Hotel ballroom or historic venue: Carpeted rooms with airwalls and lower ceilings, often with a food and beverage minimum. A good fit for a conference with a tabletop expo, a sponsor showcase or a reception with exhibit tables.
If your show has hundreds of booths and heavy freight, start with the convention center halls. If it is a conference with a modest sponsor area, a hotel ballroom keeps sessions, meals and exhibits close together.
How Room Blocks Change the Math
When a downtown venue or its partner hotels ask for a room block, the cheapest rent is not always the cheapest show. Read the attrition clause, which sets how many rooms you must fill before you owe the difference, and the cut-off date for releasing rooms. Some venues reduce rent when a show fills a block, so ask for the rent with and without the block before you compare Kansas City with St. Louis.
Worked Example: Will Your Show Fit?
Start with the booths you expect to sell, then add aisles, registration, food, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout and the fire marshal's rules.
- Plan used: America's Center in St. Louis, drawn at about 385 x 301 feet, or roughly 115,900 square feet gross.
- At 45 percent for booths: roughly 52,100 square feet.
- Booth mix example: 450 booths of 10 x 10 feet (45,000 square feet) plus 10 islands of 20 x 20 feet (4,000 square feet) uses about 49,000 square feet, leaving a little room for a lounge or demo stage.
- Next step: Ask the venue which halls the drawing covers, since a convention center plan may show only part of the building or several halls joined together.
These are planning assumptions, not venue capacities. Run your own mix in the exhibit hall size calculator, and see standard trade show booth sizes before you set your booth menu.
Questions to Ask a Missouri Venue Before You Sign
Use this list on site visits, and see our full list of questions to ask an event venue for contract terms and costs.
- Which hall or ballroom is in our contract, and can you send a current CAD or PDF plan of it?
- Where are columns, exits, airwalls, floor ports and fire equipment, and which areas must stay clear?
- How does freight reach the floor, how many docks serve our space, and where do trucks wait?
- Which services are exclusive, such as electrical, internet, food, cleaning, security and labor, and what do they cost?
- Is there a room block, what is the attrition clause and when is the cut-off date?
- What other events share the building on our dates, including big sports or concert dates nearby that affect parking and hotel rates?
- How long are move-in and move-out, and are those days charged as rent?
- How do you handle ice, snow or severe storms on move-in day?
Kansas City Convention and Expo Venues
Kansas City has the most listings in the library for Missouri. Several are drawn for different halls of the downtown convention center, so check which halls your contract names before you open a plan.
- [Kansas City Convention Center](/venues/kansas-city-convention-center-kansas-city/), Kansas City: the drawn plan spans about 360 x 303 feet. The library has another listing for the convention center drawn at about 352 x 259 feet, so match the plan to the halls you rent.
- [H. Roe Bartle](/venues/h-roe-bartle-kansas-city/), Kansas City: the drawn plan spans about 730 x 313 feet. A long drawing that likely spans more than one hall, so trim it to the space in your contract.
- [Exhibit Hall A&B](/venues/exhibit-hall-a-and-b-kansas-city/), Kansas City: the drawn plan spans about 456 x 302 feet. A separate listing titled "Exhibit Hall E" is drawn at about 403 x 309 feet. Ask the venue which building and halls each drawing shows.
- [American Royal Complex](/venues/american-royal-complex-kansas-city/), Kansas City: the drawn plan spans about 501 x 574 feet. A large expo complex that suits consumer, equipment and agricultural shows. Ask which buildings the drawing covers.
- [Sheraton Kansas City Hotel at Crown Center](/venues/sheraton-kansas-city-hotel-at-crown-center-kansas-city/), Kansas City: the drawn plan spans about 189 x 224 feet. Hotel exhibit space for a conference with a sponsor area or tabletop expo.
St. Louis Convention and Event Venues
St. Louis gives organizers a downtown convention center, hotel ballrooms nearby and a historic venue for receptions and smaller expos. St. Charles, west of the city, adds a convention center option for regional shows.
- [America's Center](/venues/america-s-center-saint-louis/), St. Louis: the drawn plan spans about 385 x 301 feet. Ask which halls the drawing covers before you size your show from it.
- [St. Charles Convention Center](/venues/saint-charles-convention-center-saint-louis/), St. Louis: the drawn plan spans about 234 x 160 feet. Listed under St. Louis in the library, it is an option for regional and state association shows west of the city.
- [St. Louis Union Station](/venues/saint-louis-union-station-saint-louis/), St. Louis: the drawn plan spans about 341 x 190 feet. A historic venue for receptions, sponsor showcases and smaller expos. Check floor load and freight routes early.
- [Marriott St. Louis - Grand Majestic](/venues/marriott-saint-louis-grand-majestic-saint-louis/), St. Louis: the drawn plan spans about 153 x 133 feet. The plan is titled "Ballroom D-H" and suits a conference with exhibit tables or a sponsor area.
Plan Around Weather and Big Event Weeks
Missouri winters can bring ice and snow, and spring brings severe storms, so publish a weather contact and a decision deadline for exhibitors. Summers are hot and humid on the docks. Both metros also host big sports, concerts and citywide conventions that fill hotels and raise rates, so ask the venue and your hotel partners which events overlap your dates before you sign.
How to Start a Layout From a Venue Library Plan
Starting from a drawn plan saves the hours it takes to trace a hall from a PDF. Each venue page in the Map D venue directory shows the plans drawn for that building, their dimensions in feet and a preview.
- Open the venue and choose the listing and plan that match the hall in your contract.
- Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
- Trim a long multi-hall drawing down to the halls you rent, then check walls, columns and doors against the venue's current plan.
- Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
- Lay out booths and aisles in standard sizes and number them in a logical order.
- Mark sponsor spots, price booths by size and location, and hold space for returning exhibitors.
- Send the layout to the venue and the fire marshal for review before you open booth sales.
For rent, labor and service charges, see how much it costs to rent a convention center. Comparing cities across the region? See the companion lists of convention centers in Illinois and convention centers in Tennessee.
Common Mistakes When Picking a Missouri Venue
- Opening the wrong listing when the Kansas City Convention Center has several plans drawn for different halls.
- Signing a room block without reading the attrition clause and cut-off date.
- Comparing a hotel ballroom with a convention hall without adding food and beverage minimums and labor costs.
- Choosing dates that overlap a citywide event that fills hotels and streets.
- Selling booths before the fire marshal has reviewed the layout.
Where Map D Fits
Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the editor. When the layout is ready, a paid plan lets you publish an interactive floor plan, share it with exhibitors and sell booths online, with exhibitors choosing their own booth at checkout. The venue, the fire marshal, exhibitors and staff all review one to-scale plan instead of trading marked-up PDFs. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.
FAQ
Which convention centers in Missouri have floor plans in Map D's Venue Library?
At the time of writing, the library has plans for the Kansas City Convention Center, H. Roe Bartle and the American Royal Complex in Kansas City, and America's Center, the St. Charles Convention Center and St. Louis Union Station in the St. Louis area, plus several hotel exhibit spaces. It is not a complete list of every venue in the state.
Are the floor plan dimensions in this article official?
No. The dimensions describe the plans drawn in Map D's Venue Library and are approximate. They are a useful starting point for sketching a layout, but confirm hall sizes, columns, doors, ceiling heights and utilities with the venue before you sell a single space.
Should a Missouri trade show pick Kansas City or St. Louis?
Start with where your exhibitors and attendees live. Kansas City sits on the Kansas line and draws from both states and the western Plains, while St. Louis sits on the Illinois line and draws from the east. Then compare hall size, freight access, hotel rooms near the venue and total cost, including labor and exclusive services.
How do I start a floor plan for a Missouri venue in Map D?
Open the venue page in the Map D venue directory, pick the plan you want, select Use This Floor Plan Free and create a free account. The plan opens in the editor, where you can add booths, aisles and labels. Building the floor plan for one event is free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499.

