Skip to main content

Convention Centers in Virginia With Plans

By: Map D
Published: November 16, 2026
Updated November 17, 2026
Tags: trade showsevent planningevent organizerShow Management Tips
Convention Centers in Virginia With Plans

Most convention centers in Virginia that organizers shortlist sit in four regions: Hampton Roads, with a convention center in Virginia Beach and hotel event space in Norfolk; Richmond, with a downtown convention center, hotels and a raceway complex; Northern Virginia, where Arlington hotels host many conferences with exhibit floors; and the Roanoke Valley and Southwest Virginia, with civic and recreation centers. Below are the Virginia venues that already have ready-made floor plans in Map D's Venue Library, grouped by region and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to choose between a convention hall and a hotel.

Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth.

Convention Hall, Hotel or Civic Center?

Virginia shows range from big consumer expos at the coast to conferences with a sponsor hall near Washington, D.C. Each venue type changes your costs, your exhibitors' load-in and the kind of attendee you draw, so settle on the type before you compare individual buildings.

  • Convention center: Concrete exhibit floors, docks and a contractor workflow for freight, carpet and power. A good fit for trade shows and consumer expos with a large booth count.
  • Hotel exhibit space: Carpeted ballrooms and exhibit halls with airwalls, lower ceilings, food and beverage minimums and a room block. A good fit for association and government-facing conferences with a tabletop or small booth expo.
  • Civic center, raceway or recreation center: Simpler, often cheaper space with drive-in access in some buildings. A good fit for regional home shows, craft fairs, gun shows and community expos.

If your exhibitors bring large displays or vehicles, start with a convention center or a civic center with drive-in access. If your show is a conference first, a hotel keeps rooms, sessions and booths under one roof.

Worked Example: Will Your Show Fit?

Start with the booths you expect to sell, then add aisles, registration, food, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout and the fire marshal's rules.

  • Plan used: The Virginia Beach Convention Center, drawn at about 463 x 305 feet, or roughly 141,200 square feet gross.
  • At 45 percent for booths: roughly 63,500 square feet.
  • Booth mix example: 500 booths of 10 x 10 feet (50,000 square feet) plus 16 islands of 20 x 20 feet (6,400 square feet) uses about 56,400 square feet, leaving room for a lounge, food court or demo stage.
  • Compare: The Greater Richmond Convention Center plan is drawn at about 145 x 174 feet, or roughly 25,200 square feet gross. At the same 45 percent, that is room for roughly 110 booths of 10 x 10 feet, so ask the venue which hall the drawing covers and whether more halls are available.

These are planning assumptions, not venue capacities. Run your own mix in the exhibit hall size calculator, and see how to plan a trade show for the full timeline from venue to show day.

Questions to Ask a Virginia Venue Before You Sign

Use this list on site visits, and see our full list of questions to ask an event venue for contract terms and costs.

  1. Which hall, ballroom or building is in our contract, and can you send a current CAD or PDF plan of it?
  2. Where are columns, exits, airwalls, floor ports and fire equipment, and which areas must stay clear?
  3. How does freight reach the floor, and does it share docks or service corridors with hotel operations?
  4. Which services are exclusive to the venue, such as electrical, internet, food, cleaning and security, and what do they cost?
  5. Is there a room block or food and beverage minimum, and what are the attrition terms and cut-off date?
  6. What other events share the building on our dates, and how will docks, parking and signage be split?
  7. How long are move-in and move-out, and are those days charged as rent?
  8. What happens to our dates if a hurricane or tropical storm warning affects the area, and who decides whether to postpone?

Hampton Roads: Virginia Beach and Norfolk

Hampton Roads suits regional shows and association meetings that benefit from a coastal destination. Weigh hurricane season in your date choice and your contract. Norfolk's downtown Hilton has several listings in the library, drawn for different rooms and at different sizes, so check which spaces your contract names before you open a plan.

  • [Virginia Beach Convention Center](/venues/virginia-beach-convention-center-virginia-beach/), Virginia Beach: the drawn plan spans about 463 x 305 feet. Ask which halls the drawing covers before you size your show from it.
  • [The Main Hilton Norfolk](/venues/main-hilton-norfolk-norfolk/), Norfolk: the drawn plan spans about 390 x 260 feet. Other listings for the same hotel are drawn at smaller sizes for individual rooms, so match the plan to the space you rent.

Richmond and Central Virginia

Richmond sits at the center of the state, which makes it a common choice for statewide association shows that draw from every region.

  • [Greater Richmond Convention Center](/venues/greater-richmond-convention-center-richmond/), Richmond: the drawn plan spans about 145 x 174 feet. Ask which hall the drawing covers and request plans for any additional halls you rent.
  • [Richmond Marriott Downtown](/venues/richmond-marriott-downtown-richmond/), Richmond: the drawn plan spans about 148 x 129 feet. Hotel exhibit space for a conference with a sponsor area or tabletop expo.
  • [Richmond Raceway](/venues/richmond-raceway-richmond/), Richmond: the drawn plan spans about 204 x 349 feet. An option for consumer and vehicle shows. Ask which building or exhibit space the drawing shows.

Northern Virginia

Arlington hotels host many conferences with exhibit floors, especially for associations and organizations that work with the federal government. Hotel space here usually means tabletop or small booth expos, so plan booth sizes to fit the ballroom.

  • [Hyatt Regency Crystal City/ Independence Center](/venues/hyatt-regency-crystal-city-independence-center-arlington/), Arlington: the drawn plan spans about 279 x 158 feet.
  • [Crystal Gateway Marriott](/venues/crystal-gateway-marriott-arlington/), Arlington: the drawn plan spans about 215 x 136 feet.

Roanoke Valley and Southwest Virginia

  • [Salem Civic Center](/venues/salem-civic-center-salem/), Salem: the drawn plan spans about 213 x 456 feet. An option for regional shows in the Roanoke Valley.
  • [Christiansburg Rec Center](/venues/christiansburg-rec-center-christiansburg/), Christiansburg: the drawn plan spans about 250 x 211 feet. A recreation center that suits community expos, craft fairs and health fairs. Check floor protection rules for a gym floor.

Plan Around Hurricane Season and Busy Weeks

Coastal Virginia sits in the path of Atlantic hurricanes and tropical storms in late summer and fall, so read the postponement and force majeure terms before you book Hampton Roads dates. Summer beach season can fill hotels and slow traffic at the coast. In Northern Virginia and Richmond, ask which large conventions and government or legislative events overlap your dates and push up hotel rates. Publish a weather contact and a decision deadline for exhibitors.

How to Start a Layout From a Venue Library Plan

Starting from a drawn plan saves the hours it takes to trace a hall from a PDF. Each venue page in the Map D venue directory shows the plans drawn for that building, their dimensions in feet and a preview.

  1. Open the venue and choose the listing and plan that match the hall or ballroom in your contract.
  2. Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
  3. Check the drawing against the venue's current plan and fix walls, columns, doors and service areas.
  4. Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
  5. Lay out booths and aisles in standard sizes and number them in a logical order.
  6. Mark sponsor spots, price booths by size and location, and hold space for returning exhibitors.
  7. Send the layout to the venue and the fire marshal for review before you open booth sales.

For rent, labor and service charges, see how much it costs to rent a convention center. Planning elsewhere in the Southeast? See the companion list of convention centers in North Carolina.

Common Mistakes When Picking a Virginia Venue

  • Opening the wrong listing when a hotel, like the Hilton in Norfolk, has several plans drawn for different rooms.
  • Comparing a hotel ballroom with a convention hall without adding food and beverage minimums and service charges.
  • Booking coastal dates in hurricane season without reading the postponement terms.
  • Using booth sizes built for a convention hall in a hotel ballroom with low ceilings and airwalls.
  • Selling booths before the fire marshal has reviewed the layout.

Where Map D Fits

Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the editor. When the layout is ready, a paid plan lets you publish an interactive map, share it with exhibitors and sell booths online with booth sales software that lets exhibitors choose their own booth at checkout. The venue, the fire marshal, exhibitors and staff all review one to-scale plan instead of trading marked-up PDFs. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.

FAQ

Which convention centers in Virginia have floor plans in Map D's Venue Library?

At the time of writing, the library has plans for the Virginia Beach Convention Center, the Greater Richmond Convention Center and the Salem Civic Center, plus hotel exhibit spaces in Norfolk, Richmond and Arlington and a few other event venues. It is not a complete list of every venue in the state.

Are the floor plan dimensions in this article official?

No. The dimensions describe the plans drawn in Map D's Venue Library and are approximate. They are a useful starting point for sketching a layout, but confirm hall sizes, columns, doors, ceiling heights and utilities with the venue before you sell a single space.

Is a hotel exhibit hall a good choice for a Virginia trade show?

It can be for a conference with a tabletop or small booth expo, which is common for associations and government contractors in Northern Virginia. Hotel space keeps sessions, meals and exhibits together, but check ceiling heights, floor load, freight access, the food and beverage minimum and the room block attrition terms before comparing it with a convention hall.

How do I start a floor plan for a Virginia venue in Map D?

Open the venue page in the Map D venue directory, pick the plan you want, select Use This Floor Plan Free and create a free account. The plan opens in the editor, where you can add booths, aisles and labels. Building the floor plan for one event is free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499.