Skip to main content

Fairgrounds in Oregon With Floor Plans

By: Map D
Published: November 18, 2026
Updated November 18, 2026
Tags: event planningevent organizerFestivalShow Management Tips
Fairgrounds in Oregon With Floor Plans

Fairgrounds in Oregon run from the Oregon State Fairgrounds in Salem, with several large exhibit halls, to county grounds with an exhibit hall, an arena and a few barns. Below are Oregon fairgrounds that already have ready-made floor plans in Map D's Venue Library, grouped by region and linked to their venue pages so you can open a plan and start your vendor layout. First, here is how to choose a fairground for a vendor show, expo, festival or market, and how to plan around rain in the valley and on the coast and cold in Central Oregon.

Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications, so confirm every measurement, door and utility location with the venue before you sell a single space. If you need a convention hall instead, see convention centers in Oregon.

How to Choose an Oregon Fairground for Your Event

Fairgrounds suit events that need big floors, drive-in doors and easy parking: home and garden shows, gun and hobby shows, craft fairs and holiday markets, farm and equipment shows, car shows, livestock and horse events and food festivals. Fairgrounds rent is often lower than a convention center's, but the rental may cover less, so compare what is included.

1. Size the Show Before You Tour

Count vendor spaces by size, then add aisles, food, stages, restrooms, first aid and the show office. The exhibit hall size calculator turns a vendor mix into the gross space you need. Treat the result as a planning assumption to check against the fire marshal's rules.

  • Plan used: The Oregon State Fairgrounds in Salem, drawn at about 356 x 262 feet, or roughly 93,300 square feet gross.
  • At about half for vendor spaces: roughly 46,600 square feet.
  • Vendor mix example: 400 spaces of 10 x 10 feet (40,000 square feet) plus 20 spaces of 10 x 20 feet (4,000 square feet) uses about 44,000 square feet, leaving some room for a food court and a stage.
  • Compare: The Douglas County Fairgrounds plan in Roseburg is drawn at about 216 x 198 feet, or roughly 42,800 square feet gross. At the same ratio, that is room for roughly 200 spaces of 10 x 10 feet on paper, a good size for a regional home show or holiday market.

2. Exhibit Halls, Arenas and Outdoor Lots

  • Exhibit hall or events center: Best for vendor shows, craft fairs, holiday markets, gun and hobby shows and consumer expos. Ask whether it is heated on your dates and how rain is handled at the doors.
  • Arena or livestock barn: Covered space for livestock shows, horse events, car shows and food festivals. Ask about the floor surface, lighting, heat and drainage.
  • Outdoor lots and lawns: Good for food trucks, carnival rides, equipment displays and overflow vendors in the dry season. Ask about surface, power pedestals and how the ground drains after rain.

3. Load-In, Parking and RVs

Ask how vendors reach each building, how many drive-in doors there are, where trailers park and how long the setup window is. Many fairgrounds have RV areas used during their own fair; ask whether vendors who stay on site can park RVs on your dates and whether hookups are included. For grounds reached over mountain passes, such as Redmond for vendors from the Willamette Valley, give vendors slack in winter for pass conditions. Write a vendor load-in schedule once you have the answers.

4. Power and Water

Food vendors, demo booths and carnival operators need power, and many need water. Mark power drops, pedestals and water hookups on the plan before you number spaces, and charge for power as a separate line on the vendor application so you know who needs it. Size restrooms for outdoor areas with the portable toilet calculator.

5. Aisle Widths and Fire Code

Fairground buildings still need a code-compliant layout. Keep exits clear, check your trade show aisle width, mark fire equipment on the plan and review the fire marshal floor plan requirements before you submit. Outdoor layouts need clear lanes for emergency vehicles too.

6. Rain, Cold and Smoke

Oregon's regions plan differently. In the Willamette Valley and on the coast, rain is common through much of fall, winter and spring, so plan covered queues, mats at the doors and a dry place for vendor carts, and expect wind on the coast. Central Oregon is drier but colder in winter, with snow and ice on the passes. Summer can bring heat and wildfire smoke in some years, so for any event with outdoor space, have an indoor fallback, water and shade, and decide in advance who calls a delay or move indoors for smoke, heat or lightning.

Questions to Ask an Oregon Fairground Before You Sign

Use this list on site visits, and see our full list of questions to ask an event venue for contract terms and costs.

  1. Which buildings, arenas and outdoor lots does the rental include, and can you send a current site plan with dimensions?
  2. Is the exhibit building heated on our dates, including setup and teardown days?
  3. Where are the doors, power drops, water hookups and restrooms, and which areas must stay clear?
  4. Where do vendor trucks, trailers and RVs park, and are hookups included?
  5. What happens to our contract if snow, smoke or another emergency closes the grounds on our dates?
  6. Which services are exclusive to the venue, such as food, security, cleaning or electrical?
  7. What other events are on the grounds on our dates, and how will gates and parking be shared?
  8. What insurance and certificates do you require from us and from our vendors?

Oregon State Fairgrounds, Salem

The Oregon State Fair & Exposition Center in Salem hosts the state fair each summer and rents its halls for shows the rest of the year. The library has several listings for the grounds; the two below cover the grounds and the Jackman-Long Building, one of its exhibit halls.

  • [Oregon State Fairgrounds](/venues/oregon-state-fairgrounds-salem/), Salem: the drawn plan spans about 356 x 262 feet, and the venue page lists three plans. Compare them against the buildings your contract names.
  • [Oregon State Fairgrounds - Jackman Long Building](/venues/oregon-state-fairgrounds-jackman-long-building-portland/), Salem: the drawn plan spans about 358 x 243 feet. A large exhibit hall that suits consumer shows, gun and hobby shows and vendor markets. The listing names Portland as its city, but the building is on the Salem grounds.

Willamette Valley and Portland Area Fairgrounds

  • [Lane County Events Center](/venues/lane-county-events-center-eugene/), Eugene: the drawn plan spans about 138 x 226 feet, and the venue page lists a second plan. Now called Lane Events Center, it hosts the Lane County Fair and has exhibit halls, a convention center and a livestock arena.
  • [Westside Commons](/venues/westside-commons-hillsboro/), Hillsboro: the drawn plan spans about 259 x 188 feet. Westside Commons is the Washington County fairgrounds campus, home of the Washington County Fair each July.
  • [Wingspan Event and Conference Center](/venues/wingspan-event-and-conference-center-hillsboro/), Hillsboro: the drawn plan spans about 261 x 190 feet. The newer event building on the Westside Commons campus, with an exposition hall and conference space, which suits trade shows and conferences with an expo. The library has a second Wingspan listing; this is the one to open.

Central, Southern and Coastal Oregon Fairgrounds

  • [Deschutes County Fair and Expo Center](/venues/deschutes-county-fair-and-exposition-center-redmond/), Redmond: the drawn plan spans about 135 x 171 feet, a size for a regional vendor show or craft market. The grounds also list conference halls, a pavilion, an arena complex and outdoor spaces, so ask which building the drawing covers.
  • [Douglas County Fairgrounds](/venues/douglas-county-fairgrounds-roseburg/), Roseburg: the drawn plan spans about 216 x 198 feet. An option for home shows, holiday markets and regional expos in southern Oregon.
  • [Clatsop County Fairgrounds](/venues/clatsop-county-fairgrounds-astoria/), Astoria: the drawn plan spans about 430 x 324 feet. The county lists an exhibit hall, an annex, a dairy barn and an indoor arena for rent, and a drawing this size likely covers more than one building or outdoor area, so ask which parts your rental includes.

How to Start a Layout From a Venue Library Plan

Each venue page in the Map D venue directory shows the plans drawn for that building, with dimensions in feet and a preview.

  1. Open the venue and choose the plan closest to the building you will rent.
  2. Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
  3. Check it against the venue's current site plan, and add outdoor lots, tents and gates as needed.
  4. Block out entrances, the show office, food, restrooms, first aid, covered queues and fire equipment clearances.
  5. Lay out numbered vendor spaces and aisles in standard sizes, with corner and end spots marked.
  6. Price spaces by size and location, mark which have power, and hold spots for returning vendors.
  7. Send the layout to the venue and the fire marshal before vendor sales open.

Running a county fair or festival on the grounds? Map D for county fairs covers vendor applications, stall sales and the public map, and festival management software adds sponsors and tickets. For costs, see how much it costs to rent a fairground and how much to charge for a vendor booth, and for neighboring states, fairgrounds in Washington and fairgrounds in California.

Common Mistakes When Renting an Oregon Fairground

  • Booking a building without confirming heat for fall, winter and spring dates.
  • Assuming the rental includes outdoor lots, arenas or parking without getting it in writing.
  • Leaving covered queues and mats out of a wet-season layout.
  • Skipping a smoke, heat and lightning plan for outdoor areas in summer.
  • Opening the wrong listing when a grounds, like the Oregon State Fairgrounds, has several plans drawn for different buildings.
  • Selling vendor spaces before the fire marshal has reviewed the layout.

Where Map D Fits

Map D is floor plan and booth sales software for organizers. You open a venue plan, then add vendor spaces, aisles, stages and labels in the editor, and publish an interactive map that vendors and guests can use. For fairs, festivals and markets, Map D Festivals & Markets is $0 a month, with a 3.9% Map D fee on booth, stall and sponsor sales, plus $0.75 per paid ticket, on top of standard card processing (Stripe, 2.9% + $0.30), and it includes free map migration within 48 hours. For trade shows and expos on the grounds, you can build the floor plan for one event free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499. Map D does not book venues, quote rates or replace the venue's official site plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own event, request a demo or build a free floor plan.

FAQ

Which fairgrounds in Oregon have floor plans in Map D's Venue Library?

At the time of writing, the library has plans for the Oregon State Fairgrounds in Salem, including the Jackman Long Building, the Lane County Events Center in Eugene, Westside Commons and its Wingspan Event and Conference Center in Hillsboro, the Deschutes County Fair and Expo Center in Redmond, the Douglas County Fairgrounds in Roseburg and the Clatsop County Fairgrounds in Astoria. It is not a complete list of every fairground in Oregon.

Are the floor plan dimensions in this article official?

No. The dimensions describe the plans drawn in Map D's Venue Library. They are a useful starting point for sketching a layout, but confirm building sizes, doors, columns, utilities and outdoor areas with the venue before you sell a single space.

When is the best time to hold an event at an Oregon fairground?

It depends on the region and whether you use outdoor space. West of the Cascades, rain is common from fall through spring, so indoor buildings suit those months. Central Oregon has colder winters and hot, dry summers. Many grounds are busiest in summer around their own county fair and, in Salem, the state fair, so ask which dates are open well ahead.

How much does it cost to rent a fairground in Oregon?

Costs depend on the buildings, outdoor space, days and services you need, so ask each venue for a written quote. Many county fairgrounds publish rental rates on the county website. Our guide on how much it costs to rent a fairground lists the line items to compare, including building rent, setup days, utilities, security, cleaning, parking and insurance.