Convention Centers in Utah With Plans

Most convention centers in Utah that organizers shortlist sit along the Wasatch Front, from Layton in the north through Salt Lake City to Sandy in the south. Salt Lake City has a downtown convention center, a hotel with event space and the state fairgrounds; Sandy has an exposition center south of the city; Layton has a conference center north of it. In southern Utah, St. George has a convention center for regional shows. Below are the Utah venues that already have ready-made floor plans in Map D's Venue Library, grouped by region and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to choose the right type of building for your show.
Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth.
Convention Center, Expo Center or Fairpark?
Utah shows range from outdoor industry and tech conferences downtown to home, boat, RV and hunting expos that draw families from across the Wasatch Front. Each venue type changes your costs, your exhibitors' load-in and the kind of attendee you draw, so settle on the type before you compare individual buildings.
- Downtown convention center: Concrete exhibit floors, docks, meeting rooms and nearby hotels. A good fit for national trade shows and multi-day conferences with a large booth count.
- Expo or conference center outside downtown: Open floors with easier parking. A good fit for consumer shows and regional trade shows whose visitors drive in.
- Fairgrounds or hotel event space: Fairground expo buildings offer drive-in access and simpler services; a hotel ballroom keeps a small conference under one roof. Good fits for community expos and association meetings with a tabletop expo.
If your exhibitors bring boats, RVs, trailers or large builds, start with an expo center or fairground building with drive-in doors. If your show is a conference first, a downtown hall or hotel keeps rooms, sessions and booths close together.
Downtown Salt Lake or the Suburbs?
Downtown Salt Lake City puts a show near the airport, light rail and the largest cluster of hotels in the state, which matters for national exhibitors flying in. Suburban venues in Sandy and Layton can be easier for consumer shows, where most visitors drive and parking decides attendance. Price the same show in both, including labor, services, parking and the hotel block, before you decide.
Worked Example: Will Your Show Fit?
Start with the booths you expect to sell, then add aisles, registration, food, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout and the fire marshal's rules.
- Plan used: The Salt Palace plan titled Halls 1 & A, B, drawn at about 570 x 371 feet, or roughly 211,500 square feet gross.
- At 45 percent for booths: roughly 95,200 square feet.
- Booth mix example: 820 booths of 10 x 10 feet (82,000 square feet) plus 20 islands of 20 x 20 feet (8,000 square feet) uses about 90,000 square feet, leaving room for a lounge, food court or demo stage.
- Compare: The Mountain America Exposition Center plan is drawn at about 375 x 278 feet, or roughly 104,300 square feet gross. At the same 45 percent, that is room for roughly 470 booths of 10 x 10 feet, so ask the venue which hall the drawing covers.
These are planning assumptions, not venue capacities. Run your own mix in the exhibit hall size calculator, and check standard trade show booth sizes before you set your booth menu.
Trade Show Checklist for Utah Venues
Use this checklist to choose a hall and lay out an expo in it. The first half is for site visits and contract talks; the second half is for the floor plan itself. Our full list of questions to ask an event venue covers contract terms and costs in more depth.
- Get a current CAD or PDF plan of the exact hall, ballroom or building in your contract, not a marketing brochure of the whole venue.
- Mark columns, exits, airwalls, floor ports, fire equipment and any areas that must stay clear before you draw a single booth.
- Ask how freight reaches the floor, how many docks serve your space, where trucks wait and whether docks are shared with other events.
- List the services that are exclusive to the venue, such as electrical, internet, food, cleaning, security and labor, and get the rates in writing.
- Ask about room blocks, food and beverage minimums, attrition terms and cut-off dates if a hotel or partner hotels are involved.
- Ask how the venue handles alcohol service for receptions and sponsor events, since Utah's rules differ from many states.
- For vehicle, boat or RV exhibits, ask about drive-in door sizes, fuel and battery rules and where trailers park during the show.
- Set your aisle widths early. Many organizers use 10-foot aisles as a baseline and wider main aisles; see trade show aisle width for the trade-offs, then confirm the minimum with the fire marshal.
- Size the booth count with the booth capacity calculator before you promise exhibitors a number.
- Confirm move-in and move-out hours, and whether those days are charged as rent.
- Send the draft layout to the venue and the fire marshal for review before you open booth sales.
Salt Lake City
Salt Lake City suits national conferences and statewide trade shows. The Salt Palace has two listings in the library, drawn for different halls; we link the one titled Halls 1 & A, B below, so match the plan to the halls in your contract.
- [Salt Palace](/venues/salt-palace-salt-lake-city/), Salt Lake City: the plan titled Halls 1 & A, B spans about 570 x 371 feet. Ask whether you rent all of the drawn halls or only part of them before you size your show from it.
- [Utah State Fairpark](/venues/utah-state-fairpark-salt-lake-city/), Salt Lake City: the plan titled Expo Buildings spans about 370 x 268 feet. Fairground expo buildings for consumer shows, gun shows, craft fairs and animal or agricultural events. Check walkways between buildings when you lay out booths.
- [Little America Hotel](/venues/little-america-hotel-salt-lake-city/), Salt Lake City: the drawn plan spans about 134 x 140 feet. Hotel event space for a conference with a sponsor area or tabletop expo.
Sandy, Layton and the Wasatch Front
- [Mountain America Exposition Center](/venues/mountain-america-exposition-center-sandy/), Sandy: the drawn plan spans about 375 x 278 feet. An expo center south of Salt Lake City that suits consumer shows, home shows and regional expos.
- [Davis Conference Center](/venues/davis-conference-center-layton/), Layton: the drawn plan spans about 252 x 163 feet. A conference center north of Salt Lake City for regional trade shows, job fairs and association meetings with an exhibit area.
St. George and Southern Utah
- [Dixie Convention Center](/venues/dixie-convention-center-saint-george/), St. George: the drawn plan spans about 263 x 230 feet. A convention center for regional shows aimed at southern Utah and nearby Nevada and Arizona.
Plan Around Snow, Heat and Busy Weeks
Winter brings snow to the Wasatch Front and mountain passes, and ski season can fill hotels and raise rates in and around Salt Lake City, so read the postponement terms and publish a weather contact and a decision deadline for exhibitors. Southern Utah is the opposite: summers in St. George are very hot on the docks, while winter dates are milder. Ask the venue which citywide conventions, sports events and holiday weeks overlap your dates before you sign.
How to Start a Layout From a Venue Library Plan
Starting from a drawn plan saves the hours it takes to trace a hall from a PDF. Each venue page in the Map D venue directory shows the plans drawn for that building, their dimensions in feet and a preview.
- Open the venue and choose the listing and plan that match the halls or buildings in your contract.
- Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
- Trim a multi-hall drawing down to the halls you rent, then check walls, columns, doors and drive-in doors against the venue's current plan.
- Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
- Lay out booths and aisles in standard sizes and number them in a logical order.
- Mark sponsor spots, price booths by size and location, and hold space for returning exhibitors.
- Send the layout to the venue and the fire marshal for review before you open booth sales.
For rent, labor and service charges, see how much it costs to rent a convention center. Comparing cities across the Mountain West? See the companion lists of convention centers in Colorado and convention centers in Arizona.
Common Mistakes When Picking a Utah Venue
- Opening the wrong listing when the Salt Palace has more than one plan drawn for different halls.
- Planning receptions and sponsor bars without checking how alcohol service works at the venue.
- Choosing a downtown hall for a consumer show whose visitors mostly drive, without checking parking.
- Booking winter move-in dates without reading the weather and postponement terms.
- Selling booths before the fire marshal has reviewed the layout.
Where Map D Fits
Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the editor. When the layout is ready, a paid plan lets you publish an interactive map, share it with exhibitors and sell booths online, with exhibitors choosing their own booth at checkout. That is the core of Map D's event floor plan software: the venue, the fire marshal, exhibitors and staff all review one to-scale plan instead of trading marked-up PDFs. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.
FAQ
Which convention centers in Utah have floor plans in Map D's Venue Library?
At the time of writing, the library has plans for the Salt Palace in Salt Lake City, the Mountain America Exposition Center in Sandy, the Davis Conference Center in Layton, the Dixie Convention Center in St. George, the Utah State Fairpark and the Little America Hotel. It is not a complete list of every venue in the state.
Are the floor plan dimensions in this article official?
No. The dimensions describe the plans drawn in Map D's Venue Library and are approximate. They are a useful starting point for sketching a layout, but confirm hall sizes, columns, doors, ceiling heights and utilities with the venue before you sell a single space.
Should a Utah trade show be in Salt Lake City or elsewhere in the state?
Most statewide and national shows choose the Wasatch Front, where the airport, hotels and most of the population are. A downtown hall suits national conferences, while an expo center in the suburbs can suit consumer shows with heavy parking needs. St. George suits shows aimed at southern Utah and visitors from Nevada and Arizona, and winter dates there avoid mountain snow.
How do I start a floor plan for a Utah venue in Map D?
Open the venue page in the Map D venue directory, pick the plan you want, select Use This Floor Plan Free and create a free account. The plan opens in the editor, where you can add booths, aisles and labels. Building the floor plan for one event is free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499.

