Skip to main content

Convention Centers in Iowa With Plans

By: Map D
Published: November 17, 2026
Updated November 17, 2026
Tags: event organizertrade showsEvent Managementevent planning
Convention Centers in Iowa With Plans

Convention centers in Iowa are spread across the state rather than clustered in one city. Des Moines, in the middle of the state, has a convention center and an events center; Cedar Rapids has a downtown convention center, a hotel convention complex and Hawkeye Downs; Waterloo and Cedar Falls have a convention center and a domed venue; Davenport has a river center in the Quad Cities; and Dubuque and Mason City have their own conference and events centers. Below are the Iowa venues that already have ready-made floor plans in Map D's Venue Library, grouped by region and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to choose the right type of building for your show.

Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth.

Convention Center, Events Center or Dome?

Iowa shows range from statewide association conferences in Des Moines to farm, home, sport and hobby expos that draw families from a few counties around. Each venue type changes your costs, your exhibitors' load-in and the kind of attendee you draw, so settle on the type before you compare individual buildings.

  • Convention center: Exhibit halls with docks, meeting rooms and hotels nearby. A good fit for association shows and trade shows with sessions and a booth floor.
  • Events center or regional expo venue: Large open floors, often with drive-in access and big parking lots. A good fit for farm shows, home shows, sport and outdoor expos and equipment displays.
  • Dome or hotel convention complex: A dome gives a big open floor for consumer shows with large displays; a hotel complex keeps a conference, rooms and a tabletop expo under one roof.

If your exhibitors bring tractors, boats, campers or other large equipment, start with an events center or dome with drive-in access. If your show is a conference first, a convention center or hotel complex keeps rooms, sessions and booths close together.

Plan Around the Farm Calendar

Many Iowa shows have agricultural exhibitors or visitors. Spring planting and fall harvest keep them in the fields, which is why many farm and rural shows land in winter. That brings its own risk: blizzards and ice on move-in day. Pick dates with both in mind, and ask your exhibitor advisory group which weeks they can actually staff a booth.

Worked Example: Will Your Show Fit?

Start with the booths you expect to sell, then add aisles, registration, food, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout and the fire marshal's rules.

  • Plan used: The Community Choice Credit Union Convention Center in Des Moines, drawn at about 386 x 478 feet, or roughly 184,500 square feet gross.
  • At 45 percent for booths: roughly 83,000 square feet.
  • Booth mix example: 700 booths of 10 x 10 feet (70,000 square feet) plus 20 islands of 20 x 20 feet (8,000 square feet) uses about 78,000 square feet, leaving room for a lounge, food court or demo stage.
  • Compare: The Waterloo Convention Center plan is drawn at about 212 x 259 feet, or roughly 54,900 square feet gross. At the same 45 percent, that is room for roughly 245 booths of 10 x 10 feet, so ask the venue which hall the drawing covers.

These are planning assumptions, not venue capacities. Run your own mix in the exhibit hall size calculator, and check standard trade show booth sizes before you set your booth menu.

Trade Show Checklist for Iowa Venues

Use this checklist to choose a hall and lay out an expo in it. The first half is for site visits and contract talks; the second half is for the floor plan itself. Our full list of questions to ask an event venue covers contract terms and costs in more depth.

  1. Get a current CAD or PDF plan of the exact hall, ballroom or building in your contract, not a marketing brochure of the whole venue.
  2. Mark columns, exits, airwalls, floor ports, fire equipment and any areas that must stay clear before you draw a single booth.
  3. Ask how freight reaches the floor, how many docks serve your space, where trucks wait and whether docks are shared with other events.
  4. List the services that are exclusive to the venue, such as electrical, internet, food, cleaning, security and labor, and get the rates in writing.
  5. Ask about room blocks, food and beverage minimums, attrition terms and cut-off dates if a hotel or partner hotels are involved.
  6. For equipment and vehicle exhibits, ask about drive-in door sizes, floor load limits, fuel and battery rules and where trailers park.
  7. Ask how the venue handles snow removal, and who decides whether to postpone if a blizzard hits on move-in day.
  8. Set your aisle widths early. Many organizers use 10-foot aisles as a baseline and wider main aisles; see trade show aisle width for the trade-offs, then confirm the minimum with the fire marshal.
  9. Size the booth count with the booth capacity calculator before you promise exhibitors a number.
  10. Confirm move-in and move-out hours, and whether those days are charged as rent.
  11. Send the draft layout to the venue and the fire marshal for review before you open booth sales.

Des Moines and Central Iowa

Des Moines suits statewide shows because most Iowans can drive there in a few hours. The library lists the Iowa Events Center and the Community Choice Credit Union Convention Center separately, so open the listing that matches the building and hall in your contract.

  • [Community Choice Credit Union Convention Center](/venues/community-choice-credit-union-convention-center-des-moines/), Des Moines: the drawn plan spans about 386 x 478 feet. Ask which halls the drawing covers before you size your show from it.
  • [Iowa Events Center](/venues/iowa-events-center-des-moines/), Des Moines: the plan titled Hall C spans about 271 x 334 feet. Ask whether more halls are available and request plans for any you add.

Cedar Rapids, Waterloo and Cedar Falls

Eastern and northeastern Iowa have several options within a short drive. In Cedar Rapids, the Alliant Energy PowerHouse and the DoubleTree convention complex are drawn at nearly the same size, so ask whether the two plans cover the same space before you compare them.

  • [Alliant Energy PowerHouse Convention Center](/venues/alliant-energy-powerhouse-convention-center-cedar-rapids/), Cedar Rapids: the drawn plan spans about 321 x 281 feet. A downtown convention center for regional trade shows and association meetings.
  • [DoubleTree by Hilton Cedar Rapids Convention Complex](/venues/doubletree-by-hilton-cedar-rapids-convention-complex-cedar-rapids/), Cedar Rapids: the drawn plan spans about 326 x 281 feet. A hotel convention complex for conferences with an exhibit area.
  • [Hawkeye Downs](/venues/hawkeye-downs-cedar-rapids/), Cedar Rapids: the drawn plan spans about 370 x 163 feet. An option for consumer shows, collectibles shows and community expos.
  • [Waterloo Convention Center](/venues/waterloo-convention-center-waterloo/), Waterloo: the drawn plan spans about 212 x 259 feet. A convention center for regional shows in northeast Iowa.
  • [UNI-Dome](/venues/uni-dome-cedar-falls/), Cedar Falls: the drawn plan spans about 417 x 236 feet. A domed venue with a large open floor that suits home shows, sport shows and other consumer expos. Check floor protection rules before you plan heavy displays.

Quad Cities, Dubuque and North Iowa

  • [River Center South Hall](/venues/river-center-south-hall-davenport/), Davenport: the drawn plan spans about 210 x 186 feet. Exhibit space in the Quad Cities that draws from both Iowa and Illinois.
  • [Grand River Conference Center](/venues/grand-river-conference-center-dubuque/), Dubuque: the drawn plan spans about 170 x 235 feet. A conference center for regional association meetings and trade shows in eastern Iowa.
  • [North Iowa Events Center](/venues/north-iowa-events-center-mason-city/), Mason City: the drawn plan spans about 245 x 273 feet. An events center for farm, home and community shows in north central Iowa.

Plan Around Weather and Busy Weekends

Iowa winters bring snow, ice and wind, and spring brings severe storms, so read the postponement and force majeure terms and publish a weather contact and a decision deadline for exhibitors. College football weekends fill hotels in university towns such as Ames, Iowa City and Cedar Falls, and big tournaments and concerts do the same in Des Moines, so ask the venue and your hotel partners which events overlap your dates before you sign.

How to Start a Layout From a Venue Library Plan

Starting from a drawn plan saves the hours it takes to trace a hall from a PDF. Each venue page in the Map D venue directory shows the plans drawn for that building, their dimensions in feet and a preview.

  1. Open the venue and choose the listing and plan that match the hall or building in your contract.
  2. Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
  3. Check walls, columns, doors and drive-in doors against the venue's current plan, and trim the drawing to the space you rent.
  4. Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
  5. Lay out booths and aisles in standard sizes and number them in a logical order.
  6. Mark sponsor spots, price booths by size and location, and hold space for returning exhibitors.
  7. Send the layout to the venue and the fire marshal for review before you open booth sales.

For rent, labor and service charges, see how much it costs to rent a convention center. Comparing cities across the Midwest? See the companion lists of convention centers in Minnesota and convention centers in Illinois.

Common Mistakes When Picking an Iowa Venue

  • Comparing two listings that may show the same space, such as the two Cedar Rapids convention plans, as if they were separate halls.
  • Booking a farm show during planting or harvest, when agricultural exhibitors and visitors can't attend.
  • Choosing winter dates without reading the weather and postponement terms.
  • Planning heavy equipment displays without checking floor load and drive-in door sizes.
  • Selling booths before the fire marshal has reviewed the layout.

Where Map D Fits

Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the editor. When the layout is ready, a paid plan lets you publish an interactive map, share it with exhibitors and sell booths online, with exhibitors choosing their own booth at checkout. That is the core of Map D's event floor plan software: the venue, the fire marshal, exhibitors and staff all review one to-scale plan instead of trading marked-up PDFs. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.

FAQ

Which convention centers in Iowa have floor plans in Map D's Venue Library?

At the time of writing, the library has plans for venues in Des Moines, Cedar Rapids, Davenport, Waterloo, Cedar Falls, Dubuque and Mason City, including the Iowa Events Center, the Community Choice Credit Union Convention Center, the Alliant Energy PowerHouse Convention Center and the UNI-Dome. It is not a complete list of every venue in the state.

Are the floor plan dimensions in this article official?

No. The dimensions describe the plans drawn in Map D's Venue Library and are approximate. They are a useful starting point for sketching a layout, but confirm hall sizes, columns, doors, ceiling heights and utilities with the venue before you sell a single space.

Which Iowa city is best for a regional trade show?

Start with where your exhibitors and attendees are. Des Moines sits in the middle of the state and suits statewide association and trade shows. Cedar Rapids, Waterloo and Cedar Falls serve eastern and northeastern Iowa, Davenport draws from both sides of the Mississippi in the Quad Cities, and Dubuque and Mason City serve their own regions. Compare hall size, parking, hotels near the venue and total cost.

How do I start a floor plan for a Iowa venue in Map D?

Open the venue page in the Map D venue directory, pick the plan you want, select Use This Floor Plan Free and create a free account. The plan opens in the editor, where you can add booths, aisles and labels. Building the floor plan for one event is free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499.