Convention Centers in Maryland With Plans

Most convention centers in Maryland that organizers shortlist sit in four areas: Baltimore, with a downtown convention center, harbor hotels and banquet halls in the suburbs; the Washington, D.C. suburbs, with a large resort and convention center at National Harbor and a casino event hall in Hanover; the Eastern Shore, with a convention center in Ocean City; and Central and Western Maryland, with fairgrounds in Timonium and Frederick. Below are the Maryland venues that already have ready-made floor plans in Map D's Venue Library, grouped by region and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to choose the right type of building for your show.
Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth.
Convention Center, Resort or Fairground?
Maryland shows range from government and association conferences near Washington to boat, home and craft shows that draw families from across the region. Each venue type changes your costs, your exhibitors' load-in and the kind of attendee you draw, so settle on the type before you compare individual buildings.
- Convention center: Concrete exhibit floors, docks and a contractor workflow for freight, carpet and power. A good fit for trade shows and consumer expos with a large booth count.
- Resort, casino or hotel exhibit space: Exhibit halls and ballrooms with airwalls, food and beverage minimums and a room block. A good fit for conferences with a sponsor hall and for shows that want evening events on site.
- Fairground exhibition building: Simpler, often cheaper space with drive-in access and big parking lots. A good fit for regional home shows, craft fairs, gun shows, antiques shows and community expos.
If your exhibitors bring large displays, boats or vehicles, start with a convention center or a fairground building with drive-in access. If your show is a conference first, a resort or hotel keeps rooms, sessions and booths under one roof.
Baltimore or the D.C. Suburbs?
Baltimore and National Harbor are less than an hour apart, but they draw differently. National Harbor puts a conference on the doorstep of federal agencies, associations and contractors in the D.C. area, with everything inside one resort. Baltimore offers a downtown convention center with harbor hotels nearby and draws from Baltimore, central Maryland and southern Pennsylvania. Price the same show in both, including labor, services, parking and the hotel block, before you decide.
Worked Example: Will Your Show Fit?
Start with the booths you expect to sell, then add aisles, registration, food, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout and the fire marshal's rules.
- Plan used: The Hall at Maryland Live! in Hanover, drawn at about 446 x 251 feet, or roughly 111,900 square feet gross.
- At 45 percent for booths: roughly 50,400 square feet.
- Booth mix example: 440 booths of 10 x 10 feet (44,000 square feet) plus 12 islands of 20 x 20 feet (4,800 square feet) uses about 48,800 square feet, leaving a little room for a lounge or demo stage.
- Compare: The Richard E. Powell Convention Center plan in Ocean City is drawn at about 274 x 238 feet, or roughly 65,200 square feet gross. At the same 45 percent, that is room for roughly 290 booths of 10 x 10 feet, so ask the venue which hall the drawing covers.
These are planning assumptions, not venue capacities. Run your own mix in the exhibit hall size calculator, and check standard trade show booth sizes before you set your booth menu.
Trade Show Checklist for Maryland Venues
Use this checklist to choose a hall and lay out an expo in it. The first half is for site visits and contract talks; the second half is for the floor plan itself. Our full list of questions to ask an event venue covers contract terms and costs in more depth.
- Get a current CAD or PDF plan of the exact hall, ballroom or building in your contract, not a marketing brochure of the whole venue.
- Mark columns, exits, airwalls, floor ports, fire equipment and any areas that must stay clear before you draw a single booth.
- Ask how freight reaches the floor, how many docks serve your space, where trucks wait and whether docks are shared with other events.
- List the services that are exclusive to the venue, such as electrical, internet, food, cleaning, security and labor, and get the rates in writing.
- Ask about room blocks, food and beverage minimums, attrition terms and cut-off dates if a hotel or partner hotels are involved.
- At a resort with several exhibit halls, confirm in writing which halls and levels you rent and which other groups share the building.
- At a fairground, ask about floor surfaces, heating or cooling in the exhibition building and blackout dates during the fairground's own events.
- Set your aisle widths early. Many organizers use 10-foot aisles as a baseline and wider main aisles; see trade show aisle width for the trade-offs, then confirm the minimum with the fire marshal.
- Size the booth count with the booth capacity calculator before you promise exhibitors a number.
- Confirm move-in and move-out hours, and whether those days are charged as rent.
- Send the draft layout to the venue and the fire marshal for review before you open booth sales.
Baltimore and Central Maryland
Baltimore suits shows that draw from the I-95 corridor between Washington and Philadelphia. The Baltimore Convention Center drawing covers a whole level, so trim it to the halls you rent. Martin's West has two listings in the library; the one linked below is the Woodlawn listing.
- [Baltimore Convention Center](/venues/baltimore-convention-center-baltimore/), Baltimore: the plan titled Level 300 spans about 1,035 x 730 feet. A large drawing that likely covers more than the exhibit floor, so ask which halls you rent before you size your show from it.
- [Hilton Baltimore Harbor](/venues/hilton-baltimore-harbor-baltimore/), Baltimore: the drawn plan spans about 302 x 191 feet. Hotel exhibit space for a conference with a sponsor area or tabletop expo.
- [Martin's West](/venues/martin-s-west-woodlawn/), Woodlawn: the drawn plan spans about 222 x 217 feet. Banquet and event space west of Baltimore that suits job fairs, bridal shows and tabletop expos.
- [Timonium Fairgrounds - Exhibition Hall](/venues/timonium-fairgrounds-exhibition-hall-timonium/), Timonium: the drawn plan spans about 173 x 276 feet. A fairground exhibition hall north of Baltimore for consumer shows, collectibles shows and craft fairs.
- [The Hall at Maryland Live!](/venues/hall-at-maryland-live-hanover/), Hanover: the drawn plan spans about 446 x 251 feet. A casino event hall between Baltimore and Washington, suited to consumer shows and expos that benefit from on-site dining and parking.
National Harbor and the D.C. Suburbs
The Gaylord National Resort & Convention Center has several listings in the library, drawn for different exhibit halls and levels. We link one listing below; open the venue directory to find the plan that matches the halls in your contract.
- [Gaylord National Resort & Convention Center](/venues/gaylord-national-resort-and-convention-center-national-harbor/), National Harbor: the drawn plan spans about 289 x 200 feet. Other listings for the same resort show the Prince George's exhibit halls and a full level, so match the plan to the space you rent.
Ocean City and Western Maryland
- [Richard E. Powell Convention Center](/venues/richard-e-powell-convention-center-ocean-city/), Ocean City: the drawn plan spans about 274 x 238 feet. A convention center on the Eastern Shore that suits association meetings and regional shows tied to a beach destination.
- [The Frederick Fairgrounds](/venues/frederick-fairgrounds-frederick/), Frederick: the plan titled GFF Buildings 7, 8, 13 spans about 260 x 224 feet. Several fairground buildings drawn together, so check aisles and walkways between buildings when you lay out booths.
Plan Around Weather and Busy Weeks
Maryland winters can bring snow and ice, and late summer and fall can bring tropical storms to the Eastern Shore, so read the postponement and force majeure terms before you book, and publish a weather contact and a decision deadline for exhibitors. Ocean City hotels fill and rates rise in the summer beach season. Near Washington and Annapolis, ask which conventions, government events and legislative weeks overlap your dates and push up hotel rates.
How to Start a Layout From a Venue Library Plan
Starting from a drawn plan saves the hours it takes to trace a hall from a PDF. Each venue page in the Map D venue directory shows the plans drawn for that building, their dimensions in feet and a preview.
- Open the venue and choose the listing and plan that match the hall, level or building in your contract.
- Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
- Trim a full-level or multi-building drawing down to the space you rent, then check walls, columns and doors against the venue's current plan.
- Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
- Lay out booths and aisles in standard sizes and number them in a logical order.
- Mark sponsor spots, price booths by size and location, and hold space for returning exhibitors.
- Send the layout to the venue and the fire marshal for review before you open booth sales.
For rent, labor and service charges, see how much it costs to rent a convention center. Comparing cities across the Mid-Atlantic? See the companion lists of convention centers in Virginia and convention centers in Pennsylvania.
Common Mistakes When Picking a Maryland Venue
- Opening the wrong listing when a resort like the Gaylord National has several plans drawn for different halls.
- Sizing a show from the full Baltimore Convention Center level drawing instead of the halls you rent.
- Comparing a resort hall with a fairground building without adding food and beverage minimums and service charges.
- Booking Ocean City dates in peak beach season without checking hotel rates for exhibitors.
- Selling booths before the fire marshal has reviewed the layout.
Where Map D Fits
Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the editor. When the layout is ready, a paid plan lets you publish an interactive map, share it with exhibitors and sell booths online, with exhibitors choosing their own booth at checkout. That is the core of Map D's event floor plan software: the venue, the fire marshal, exhibitors and staff all review one to-scale plan instead of trading marked-up PDFs. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.
FAQ
Which convention centers in Maryland have floor plans in Map D's Venue Library?
At the time of writing, the library has plans for the Baltimore Convention Center, the Gaylord National Resort & Convention Center at National Harbor, the Richard E. Powell Convention Center in Ocean City and The Hall at Maryland Live! in Hanover, plus fairgrounds in Timonium and Frederick and hotel and banquet spaces in the Baltimore area. It is not a complete list of every venue in the state.
Are the floor plan dimensions in this article official?
No. The dimensions describe the plans drawn in Map D's Venue Library and are approximate. They are a useful starting point for sketching a layout, but confirm hall sizes, columns, doors, ceiling heights and utilities with the venue before you sell a single space.
Is a resort or hotel exhibit hall a good choice for a Maryland trade show?
It can be, especially for conferences that draw from Washington, D.C. A resort or hotel keeps sessions, meals, exhibits and rooms together, but check ceiling heights, floor load, freight access, the food and beverage minimum and the room block attrition terms before comparing it with a convention hall or a fairground building.
How do I start a floor plan for a Maryland venue in Map D?
Open the venue page in the Map D venue directory, pick the plan you want, select Use This Floor Plan Free and create a free account. The plan opens in the editor, where you can add booths, aisles and labels. Building the floor plan for one event is free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499.

