Venue Walkthrough Checklist for Trade Shows

A venue walkthrough checklist for a trade show or expo covers everything you need to confirm in person before you sign and again before move-in: hall dimensions and column positions, ceiling heights, doors, docks and freight access, power and utilities, floor load limits, rigging points, exits and life safety, Wi-Fi and cell coverage, restrooms and food service, accessibility and parking. The copy-ready checklist below is grouped by area so you can print it, take a tape measure and a floor plan, and mark each item on site.
Use it alongside our list of questions to ask an event venue, which covers contract and pricing questions you can ask by email. The walkthrough is for the things you need to see, measure and photograph yourself.
Two Walkthroughs: Pre-Contract and Pre-Show
Most organizers need two visits, with different goals:
- Pre-contract site visit: Confirm the space fits your show, find anything that limits your booth count or layout, and turn surprises into contract terms before you sign. Bring the show owner and whoever builds the floor plan.
- Pre-show walkthrough: A few weeks to a few months before move-in, confirm the final floor plan on the actual floor with your general service contractor, the venue's event manager and in-house electrical, rigging and AV contacts. Settle move-in logistics and anything the fire marshal flagged.
Before either visit, ask the venue for its CAD or PDF floor plan, its event manual or exhibitor rules and its list of exclusive services. Print the floor plan large enough to write on and bring a laser measure, a tape measure, a camera and a notepad.
1. Hall Dimensions and Layout
- Confirm the hall's length and width against the venue drawing, and measure any area the drawing does not show clearly.
- Mark every column with its position and size; columns decide where booths and aisles can go.
- Note air walls, seams and any area that cannot hold booths.
- Find floor boxes, utility pits and floor ports, and their spacing.
- Check the floor surface: carpet, concrete, tile or sport court, and any rules about tape or anchors.
- Look for slopes, ramps or steps inside the hall.
- Note pre-function and lobby space for registration and sponsors.
- Confirm which meeting rooms, ballrooms or outdoor areas are included.
Mark everything on your printed plan as you go. Columns and floor boxes in the wrong place on a drawing are one of the most common reasons a layout has to be redrawn after booths are sold. Our trade show floor plan checklist covers what the finished plan needs.
2. Ceiling Heights and Overhead
- Ceiling height in each part of the hall, not just the maximum.
- Low points: beams, ducts, sprinkler heads, lighting and catwalks.
- Chandeliers or fixed lighting in ballrooms that limit tall displays.
- Height limits for booth structures, double-deck booths and hanging signs.
- Sprinkler coverage rules for covered booths or ceilings inside booths.
3. Doors, Docks and Freight Access
- Number and location of loading docks, and whether they are shared with other events.
- Dock height, dock levelers and whether there is a ramp for vehicles without a lift gate.
- Freight door sizes into the hall: height and width, measured.
- Drive-in access: can trucks or vehicles drive onto the hall floor?
- Freight elevator sizes and weight limits if the hall is not on the ground floor.
- Marshaling yard or truck staging area and its distance from the venue.
- Empty crate storage location.
- Move-in and move-out hours and any overtime charges.
Freight access decides how long move-in takes and whether large exhibits, vehicles or machinery can get into the hall at all. If you show cars, boats or equipment, measure every door on the route.
4. Power and Utilities
- Where power comes from: floor boxes, wall panels or overhead drops.
- Total available power and how it is distributed across the hall.
- Whether electrical service is exclusive to the venue or an in-house contractor, and the price list.
- Water, drain and compressed air locations for exhibitors who need them.
- Natural gas access, if food or equipment exhibitors need it, and the rules for it.
- Generator rules for outdoor areas.
For a first estimate of how much power your show needs, try our event power calculator, and see trade show electrical services for how exhibitor power orders usually work.
5. Floor Load and Rigging
- Floor load limit in pounds per square foot, and any areas with a lower limit.
- Point load limits for heavy exhibits, vehicles or machinery.
- Rules for forklifts and lifts on the floor.
- Rigging points: locations, spacing and load ratings.
- Whether rigging is exclusive to an in-house contractor, and its prices.
- Lead time to order rigging for hanging signs, lighting and banners.
Get floor load and rigging limits in writing from the venue. Do not estimate them; ask for the venue's own figures and share them with exhibitors bringing heavy or hanging items.
6. Exits and Life Safety
- Every exit door, marked on your plan, with its width.
- Required clear paths to exits, and any that cannot be blocked by booths.
- Fire extinguishers, fire hose cabinets, pull stations and sprinkler controls that must stay visible and reachable.
- The approved occupancy for the hall and for your layout.
- Whether the fire marshal must approve the floor plan, and the lead time.
- First aid room, emergency procedures and the venue's security contacts.
Our guide to fire marshal floor plan requirements explains what reviewers usually look for, and the egress width calculator helps you check exit capacity for your expected crowd. The local fire code and the authority having jurisdiction set the actual requirements.
7. Wi-Fi, Cell Coverage and Technology
- Test cell signal for the major carriers at several points on the floor, including corners and the back of the hall.
- Wi-Fi: network options for attendees, exhibitors and show staff, bandwidth and prices.
- Wired internet drops for registration, lead retrieval and exhibitors who need them.
- Rules on exhibitors bringing their own hotspots or routers.
- In-house AV requirements and whether outside AV companies are allowed.
- Screens, projectors and sound systems already in the space.
Registration, badge printing and lead retrieval all depend on a reliable connection, so test it where those stations will be, not just in the lobby.
8. Attendee Facilities
- Restroom locations and count, and distance from the far corners of the hall.
- Food and beverage outlets, catering exclusives and concession hours.
- Seating and lounge space that can be used without losing booth space.
- Registration space: size, power, data and line space.
- Coat check, bag check and storage.
- Accessible entrances, routes, elevators and restrooms.
- Parking capacity, prices, shuttle and rideshare drop-off.
- Signage rules: what can be hung, where and by whom.
9. Rules, Exclusives and Costs
- Which services are exclusive: electrical, rigging, catering, AV, Wi-Fi, cleaning, security.
- What is included in the rental and what costs extra.
- Labor rules for setting up booths and handling freight.
- Rules about tape, adhesives, open flames, helium balloons and drones.
- Other events in the building during your dates and shared areas.
- Insurance and certificate requirements for you and your exhibitors.
After the Walkthrough
Within a day or two, update your floor plan with everything you measured, send the venue a written summary of what you confirmed and ask them to correct anything wrong, and turn any limits that affect booth count, freight or cost into contract terms or exhibitor manual rules. Keep the photos with the plan; they help exhibitors and your general service contractor understand the space.
With exhibition management software like Map D, you draw the hall to scale with the columns, doors and exits you measured, test booth layouts before you sign, and later publish the map so exhibitors can pick booths and pay online. Building the floor plan for one event is free; publishing the map and selling booths need a paid plan. For floor-plan-only needs, see event floor plan software.
Copy-Ready Venue Walkthrough Checklist
- Venue floor plan, event manual and exclusives list received before the visit.
- Hall dimensions confirmed and columns, air walls and floor boxes marked.
- Floor surface, slopes and taping rules noted.
- Ceiling heights and low points measured; booth and sign height limits confirmed.
- Docks, freight doors, elevators and drive-in access measured.
- Marshaling yard, crate storage and move-in and move-out hours confirmed.
- Power sources, capacity and electrical prices confirmed.
- Water, drain, air and gas locations noted.
- Floor load and point load limits received in writing.
- Rigging points, ratings and rigging vendor confirmed.
- Every exit marked with its width; clear paths and fire equipment noted.
- Approved occupancy and fire marshal review process confirmed.
- Cell signal tested across the floor; Wi-Fi and wired data options priced.
- Restrooms, food service, seating and registration space checked.
- Accessible routes, parking and drop-off checked.
- Exclusive services, labor rules and insurance requirements confirmed.
- Other events in the building during your dates noted.
- Written summary sent to the venue and floor plan updated.
FAQ
What should you check on a venue walkthrough?
Measure or confirm the hall dimensions, column positions, ceiling heights, doors and exits, loading docks and freight doors, power and utility locations, floor load limits, rigging points, Wi-Fi and cell coverage, restrooms, food service areas, accessibility and parking. Compare each item to your floor plan and your exhibitors' needs, and get anything that matters in writing.
When should you do a venue site visit for a trade show?
Do at least two. The first is before you sign the contract, to confirm the space fits your show and to find limits that change the price or layout. The second is a pre-show walkthrough a few weeks to a few months before move-in, with your general service contractor and key vendors, to confirm the final floor plan, power, rigging and move-in logistics.
Who should attend a venue walkthrough?
For a pre-contract visit, the show manager or owner and whoever builds the floor plan. For the pre-show walkthrough, add your general service contractor, the venue's event manager, the in-house electrical and rigging contacts, your AV and registration leads and, when the venue or local rules call for it, the fire marshal's office for a floor plan review.
What questions should you ask during a venue walkthrough?
Ask what is included in the rental and what costs extra, which services are exclusive to in-house vendors, what the floor load and rigging limits are, when move-in and move-out can start and end, what the fire marshal requires for your layout, how many attendees the space is approved for, and what other events are in the building during your dates.

