Orlando Trade Show Venues With Floor Plans

Orlando trade show venues come in three tiers: the Orange County Convention Center on International Drive for the biggest shows, convention resorts with their own exhibit halls and very large ballrooms for mid-size shows, and smaller expo halls in Orlando and Kissimmee for regional and consumer shows. Below are the Orlando venues that already have ready-made floor plans in Map D's Venue Library, grouped by tier and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to pick the right tier and check that your show fits.
Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth. Map D does not book venues or quote rates. If you are comparing cities across the state, see our wider guide to convention centers in Florida; this article covers Orlando and Kissimmee only, with a trade show focus.
Convention Center, Convention Resort or Expo Hall?
Orlando has more convention-grade hotel space than most cities, so the choice is less about whether a venue exists and more about which kind of contract suits your show. Settle the tier before you compare individual halls.
- Convention center hall: Concrete floors, docks, floor ports and a separate contract for rent and services. The fit for shows that need a big contiguous floor, heavy freight or several halls. Hotel rooms are booked separately, often through a housing block across several hotels.
- Convention resort exhibit hall or ballroom: Exhibit space, meeting rooms and guest rooms under one roof. The fit for association shows and conferences with an expo of a few hundred booths, where attendees stay on site. Expect the room block, food and beverage minimum and meeting space rent to be tied together.
- Hotel connected to the convention center: A ballroom or exhibit area in a hotel on International Drive, often used for overflow, breakouts or a smaller expo next to a bigger show.
- Regional expo hall: A simpler building such as an events center or fairground expo space. The fit for consumer shows, home shows, collector shows and job fairs that need lower rent and easy parking.
Worked Example: Will Your Show Fit?
Start with the booths you expect to sell, then add aisles, registration, food, lounges, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout, the columns and the fire marshal's rules.
- Plan used: Hall B in the South Building of the Orange County Convention Center, drawn at about 375 x 620 feet, or roughly 232,500 square feet gross.
- At 45 percent for booths: roughly 104,600 square feet.
- Booth mix example: 900 booths of 10 x 10 feet (90,000 square feet) plus 20 islands of 20 x 20 feet (8,000 square feet) uses about 98,000 square feet, leaving room for a food court, lounges and a demo stage.
- Compare: The Events Center at Osceola Heritage Park lists a 47,850 square foot clear-span floor on its own website. At the same 45 percent, that is room for roughly 215 booths of 10 x 10 feet on paper, a good size for a regional trade or consumer show.
These are planning assumptions, not venue capacities. Run your own mix in the booth capacity calculator or the exhibit hall size calculator, and check standard trade show booth sizes before you set your booth menu.
Orange County Convention Center
The Orange County Convention Center sits on International Drive. Its own website lists 2,055,222 square feet of exhibit space across two buildings, 1,104,940 square feet in the West Building and 950,282 in the North-South Building, plus 174 dock slips. Most shows rent a single hall or part of one, so open the listing that matches the space in your contract. The library has three:
- [Orange County Convention Center](/venues/orange-county-convention-center-orlando/), Orlando: the drawn plan, titled after a past conference, spans about 386 x 544 feet. Use it as a reference for a show of that scale, and check which halls it covers.
- [Orange County Convention Center, West Hall A3](/venues/orange-county-convention-center-west-hall-a3-orlando/), Orlando: the drawn plan spans about 226 x 309 feet, or roughly 69,800 square feet gross, a size for a show of a few hundred booths.
- [Orange County Convention Center, South Building](/venues/orlando-orange-convention-center-south-building-orlando/), Orlando: the Hall B plan spans about 375 x 620 feet, the plan used in the worked example above.
A convention center show has more moving parts than a hotel expo: a general service contractor, exclusive services, labor rules and freight schedules. Our guide to trade show union labor explains what to ask about labor, and how to plan a multi-hall trade show covers splitting a show across halls.
Hotels Connected to the Convention Center
Several hotels on International Drive link to the convention center. Rosen Hotels says the Gary Sain Memorial Skybridge connects Rosen Plaza to the West Building, and that the Rosen Centre Skywalk links Rosen Centre to the convention center. Hyatt says its Orlando hotel's ballroom is a short walk from the North-South concourse. Their ballrooms suit a smaller expo, breakouts or an overflow exhibit area next to a bigger show.
- [Hyatt Regency Orlando](/venues/hyatt-regency-orlando/): the drawn plan spans about 440 x 327 feet. Ask which ballroom and foyer the drawing covers.
- [Rosen Centre Hotel](/venues/rosen-center-hotel-orlando/): the drawn plan spans about 263 x 155 feet. The library also lists the Rosen Centre Grand Ballroom at about 262 x 152 feet; the two drawings appear to cover the same room.
- [Rosen Plaza Hotel and Convention Center](/venues/rosen-plaza-hotel-and-convention-center-orlando/): the drawn plan spans about 163 x 199 feet. The library has two more Rosen Plaza listings, Rosen Plaza Hotel at about 243 x 156 feet and Rosen Plaza at about 103 x 166 feet, so compare them against the rooms your contract names.
Convention Resorts With Exhibit Halls
These resorts host conferences with expos of a few hundred booths, and several have halls or ballrooms large enough for a full trade show. Hotel figures below come from each property's own website.
- [Gaylord Palms Resort and Convention Center](/venues/gaylord-palms-resort-and-convention-center-kissimmee/), Kissimmee: the drawn plan, titled after a past conference, spans about 572 x 423 feet. The resort's event page lists 178,500 square feet of exhibit space, including the Florida Exhibition Hall. A second listing, Gaylord Palms Resort, has a plan of Exhibition Halls E and F at about 313 x 262 feet.
- [Rosen Shingle Creek](/venues/rosen-shingle-creek-resort-orlando/), Orlando: the drawn plan spans about 340 x 199 feet. The resort lists 524,000 square feet of meeting and event space. The library has several more listings, including Rosen Shingle Creek Hotel at about 358 x 236 feet and a plan of Ballrooms J, K and L under Rosen Shingle Creek Sebastian at about 204 x 296 feet.
- [Orlando World Center Marriott, Cypress Ballroom](/venues/orlando-world-center-marriott-cypress-ballroom-orlando/), Orlando: the drawn plan spans about 467 x 285 feet. Marriott describes the Cypress Ballroom as 105,000 square feet of pillar-free space with attached loading docks. A second listing, Orlando World Center Resort, Cypress Ballroom, is drawn at about 534 x 358 feet and likely includes foyer space, so ask which drawing matches your contract.
- [Walt Disney World Dolphin Resort](/venues/walt-disney-world-dolphin-resort-orlando/), Orlando: the drawn plan spans about 757 x 242 feet. The Swan and Dolphin site lists over 600,000 square feet of indoor and outdoor function space. The library also has Walt Disney World Swan and Dolphin at about 302 x 221 feet.
- [Caribe Royale](/venues/caribe-royale-orlando/), Orlando: the drawn plan spans about 405 x 348 feet. Ask which hall or ballroom the drawing covers.
- [Hilton Orlando Bonnet Creek](/venues/hilton-orlando-bonnet-creek-orlando/), Orlando: the drawn plan spans about 358 x 276 feet. The Waterside Ballroom is drawn separately at about 266 x 249 feet.
- [Disney's Coronado Springs Resort, Veracruz Exhibit Hall](/venues/disney-coronado-springs-resort-veracruz-exhibit-hall-orlando/), Orlando: the plan of Ballrooms B and C spans about 289 x 345 feet.
Resort Ballrooms for Smaller Expos
For a conference with 40 to 150 tabletops or booths, a resort ballroom is often simpler than an exhibit hall. Our guide on how to fit a trade show in a hotel ballroom covers chandeliers, airwalls and freight routes.
- [JW Marriott Orlando Grande Lakes](/venues/jw-marriott-orlando-grande-lakes-orlando/): drawn at about 280 x 209 feet, with the Palazzo Ballroom at about 245 x 177 feet. The neighboring Ritz-Carlton Grande Lakes is drawn at about 241 x 132 feet.
- [Hyatt Regency Grand Cypress](/venues/hyatt-regency-grand-cypress-orlando/): drawn at about 266 x 201 feet, with the Grand Cypress Ballroom at about 240 x 247 feet.
- [JW Marriott Orlando Bonnet Creek, Griffin Ballroom](/venues/jw-marriott-orlando-bonnet-creek-griffin-ballroom-orlando/): drawn at about 218 x 157 feet.
- [Renaissance SeaWorld Orlando](/venues/renaissance-seaworld-orlando-orlando/): drawn at about 232 x 184 feet, with the Oceans Ballroom at about 131 x 193 feet.
- [Loews Sapphire Falls, Kingston Ballroom](/venues/loews-sapphire-falls-kingston-ballroom-orlando/): drawn at about 185 x 194 feet.
- [Omni Orlando at ChampionsGate, Osceola Ballroom](/venues/omni-orlando-at-championsgate-osceola-ballroom-orlando/): drawn at about 250 x 126 feet.
- [Hilton Orlando](/venues/hilton-orlando-orlando/): drawn at about 212 x 168 feet.
Regional Expo Halls in Orlando and Kissimmee
- [Osceola Heritage Park, Events Center](/venues/osceola-heritage-park-events-center-kissimmee/), Kissimmee: the Hall B plan spans about 189 x 201 feet. The park's website lists a 47,850 square foot clear-span floor (330 x 145 feet, 28-foot ceiling) split into Hall A (26,100 square feet) and Hall B (21,750 square feet), used for trade shows, consumer shows and conferences. The drawing is larger than Hall B alone, so ask what it includes.
- [Dezerland Park Orlando, The Event Place](/venues/dezerland-park-orlando-event-place-orlando/), Orlando: the drawn plan spans about 311 x 200 feet. An entertainment complex on International Drive whose events calendar lists fan conventions and collector shows, a fit for consumer and hobby expos.
- [Central Florida Fairgrounds](/venues/central-florida-fairgrounds-orlando/), Orlando: the drawn plan spans about 63 x 132 feet, a single small building. The fairgrounds on West Colonial Drive host the Central Florida Fair each March and rent expo facilities; ask for the full site plan if you need more space.
Trade Show Checklist for Orlando Venues
Use this list on site visits and in contract talks. Our full list of questions to ask an event venue goes deeper on costs and terms.
- Get a current CAD or PDF plan of the exact hall or ballroom in your contract, with columns, exits, airwalls and floor ports marked.
- Ask how freight reaches the floor, how many docks serve your space and whether marshaling yards or docks are shared with other shows.
- List the services that are exclusive to the venue, such as electrical, internet, food, cleaning, security and rigging, and get the rates in writing.
- At a resort, read how the room block, food and beverage minimum, attrition and meeting room rent depend on each other.
- Ask what other conventions are in the building or on International Drive the same week, and how they affect docks, parking and hotel rates.
- Ask how the venue handles hurricane warnings and who decides on a delay. The Atlantic hurricane season runs from June through November.
- Set aisle widths early. Many organizers use 10-foot aisles with wider main aisles; see trade show aisle width, then confirm with the fire marshal.
- Send the draft layout to the venue and the fire marshal before you open booth sales.
How to Start a Layout From a Venue Library Plan
Each venue page in the Map D venue directory shows the plans drawn for that building, with dimensions in feet and a preview.
- Open the venue and choose the listing and plan that match the hall or ballroom in your contract.
- Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
- Check walls, columns, doors and docks against the venue's current plan, and trim the drawing to the space you rent.
- Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
- Lay out booths and aisles in standard sizes, number them in a logical order and mark sponsor spots.
- Price booths by size and location, and hold space for returning exhibitors.
- Send the layout to the venue and the fire marshal for review before booth sales open.
Common Mistakes When Picking an Orlando Venue
- Opening the wrong listing when a venue, like Rosen Shingle Creek or the convention center, has several plans drawn for different halls and ballrooms.
- Comparing resort rent to convention center rent without adding the room block and food minimum.
- Booking a ballroom without checking ceiling height, chandeliers and the freight route to the room.
- Choosing late-summer or fall dates without reading the hurricane and force majeure terms.
- Selling booths before the fire marshal has reviewed the layout.
Where Map D Fits
Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the event floor plan software. When the layout is ready, a paid plan lets you publish an interactive map, share it with exhibitors and sell booths online, with exhibitors choosing their own booth at checkout. The same plan runs the rest of the show in Map D's trade show management software, from booth sales and the exhibitor portal to lead retrieval and check-in. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.
FAQ
What are the main trade show venues in Orlando?
The Orange County Convention Center on International Drive handles the largest shows. Below it sit convention resorts with their own exhibit halls and big ballrooms, such as Gaylord Palms in Kissimmee, Rosen Shingle Creek, Orlando World Center Marriott and the Walt Disney World Swan and Dolphin, plus hotels connected to the convention center and smaller expo spaces like the Events Center at Osceola Heritage Park.
How big is the Orange County Convention Center?
According to the convention center's own website, it has 2,055,222 square feet of exhibit space: 1,104,940 in the West Building and 950,282 in the North-South Building. Most shows rent only a hall or part of a hall, so ask for the plan of the exact space in your contract.
Can I hold a trade show in an Orlando hotel instead of the convention center?
Yes. Many Orlando resorts have exhibit halls or ballrooms large enough for a few hundred booths, and some hotels on International Drive connect to the convention center by walkways. A resort contract usually ties meeting space to a hotel room block and a food and beverage minimum, so compare total cost, not just rent.
Are the floor plan dimensions in this article official?
No. The dimensions describe the plans drawn in Map D's Venue Library. They are a useful starting point for sketching a booth layout, but confirm every measurement, column, door and utility location with the venue before you sell a single booth.

