How to Lay Out an Artist Alley

A good artist alley layout fits as many artist tables as the space allows without trapping fans in dead-end rows or letting lines for popular artists block their neighbors. Pick a standard table size, lay out back-to-back rows in the middle with wall tables around the edge, leave open floor at row ends for lines, and decide on table sharing and power before you sell. This guide covers each step for comic cons and anime conventions, with a sample plan.
If you are still building the convention itself, start with how to start a comic con or how to plan an anime convention. For pricing the tables you draw here, see our guide to comic con vendor table prices.
How an Artist Alley Differs From the Dealer Hall
The dealer hall sells booths to businesses. The artist alley sells tables to individual creators, usually at a lower price, and fans treat it as its own destination. That changes the layout:
- Tables, not booths: Most artists get a table, chairs and a little floor behind it, not a 10x10 booth with walls.
- Many small sellers: A mid-size con might have a hundred or more artists in a space that would hold far fewer dealer booths.
- Lines: A popular artist can draw a line that runs down the aisle, which blocks every table next to it.
- Tall displays: Grid walls, banners and print racks block the view if they face the wrong way.
- Shared tables: Two artists splitting a table is common and needs to show up on your map and your badge list.
Step 1: Choose Your Table Size and Unit
Pick one table unit and price everything from it. Common options include:
- Full table: One 6-foot or 8-foot banquet table, 30 inches deep, with two chairs.
- Half table: Half of a 6-foot or 8-foot table, sold to artists with smaller inventories.
- Double table: Two tables side by side for established artists or small studios.
- Corner or end table: The table at the end of a row, which has more frontage and room for a line.
Check what tables your venue supplies before you choose. If the venue has only 6-foot tables, an 8-foot standard means renting extra furniture. These sizes are planning examples, not industry rules.
Step 2: Plan Rows: Back-to-Back vs Wall Tables
Most artist alleys mix two row types:
- Back-to-back center rows: Two lines of tables face opposite aisles, with a shared strip of floor behind them for the artists. As a planning example, many cons leave 3 to 5 feet behind each table so artists can sit, store stock and get out. This fits the most tables.
- Wall tables: A single row of tables along a wall, with the artist between the table and the wall. These suit tall grid walls and banners, because nothing behind them blocks the view.
- Islands of four: Some cons cluster four tables in a square, with artists inside. This gives each table two open sides but uses more floor.
Keep rows short enough that fans are never far from a cross aisle. As a planning example, many organizers break rows every 8 to 12 tables. Aisle widths are set by the fire code and the authority having jurisdiction, not by this guide, so confirm them with the venue and fire marshal. Our guide to trade show aisle width explains the common rules and why lines need extra room.
Step 3: Plan Lines for Popular Artists
Lines are the biggest artist alley problem. Plan for them at the layout stage:
- Ask on the application: Ask artists whether they expect a line, have a large following or are doing commissions on site.
- Use row ends and walls: Put artists who draw lines at end tables or along a wall next to open floor, where a line can form without crossing other tables.
- Set the line direction: Mark it with floor tape or stanchions so it runs along a wall or into an open area, not across the aisle.
- Do not pair big names: Two popular artists side by side means two lines that merge and block the row.
- Have staff ready to cap lines: Decide in advance when a line gets capped and who tells fans.
Featured guests with paid autographs usually belong in a separate guest area, not the artist alley. If a guest artist does sit in the alley, give them extra open floor and a staff member.
Step 4: Set Rules for Table Sharing
Decide your sharing rules before applications open. Common choices: one or two artists per table, one badge per artist, and both names on the application and the map. Some cons sell half tables instead of allowing sharing, which keeps things simpler. Whatever you choose, write it down and send it with the acceptance. A booth sharing policy template gives you a starting point you can adapt for tables.
Step 5: Plan Power and Lighting
Many artists want power for light boxes, card readers, phones and drawing tablets. Power drops across a floor cost money and create trip hazards, so plan them on purpose:
- Offer power as a paid add-on with a limited number of spots.
- Group powered tables together along walls or near floor boxes to keep cable runs short.
- Tape down and cover every cable that crosses a walkway.
- Tell artists what they can plug in and whether power strips are allowed.
The event power calculator helps you estimate the total load before you talk to the venue.
Step 6: Place the Alley in the Building
Where the artist alley sits matters as much as how it is laid out. Put it on the main path between the entrance and a big draw, like the dealer hall or main stage, so fans pass through it. A dead-end room at the far end of the building gets less traffic. If the alley shares a hall with dealers, put a clear visual break between them, such as a cross aisle or a change in table color on the map, so fans know where it starts. Keep cosplay photo areas away from the alley; photo groups stop in the aisle and block tables.
Step 7: Use a Sample Artist Alley Plan
Here is a sample plan for a hypothetical con with an artist alley room of about 80x100 feet. Treat it as a planning example, not a standard:
- Wall tables: About 30 full tables around three walls, sold to artists with tall displays.
- Center rows: Four back-to-back rows of 12 tables each, broken in the middle by a cross aisle, for about 96 tables or 192 half tables.
- Line zones: Open floor at each row end and in front of the far wall for artists who expect lines.
- Powered tables: About 20 tables along one wall near the floor boxes.
- Non-table space: A help desk at the entrance, a staff table and a small artist rest area.
Run your own numbers before you open applications. The booth capacity calculator gives a quick count of how many units fit the room.
Step 8: Number Tables and Publish the Map
Number tables so fans can walk them in order. A letter for each row and a number for each table, like A1 to A24, works well. Shared tables can use the same number with both names listed. Fans plan their route around the artists they follow, so a searchable map helps them and the artists. With interactive floor plan software like Map D, you draw the room to scale, set table types and prices and, on a paid plan, publish a map where fans search by artist name. For a look at tools built for cons, see best fan convention software.
Artist Alley Layout Checklist
- Pick a table unit and confirm what tables the venue supplies.
- Lay out back-to-back center rows and wall tables for tall displays.
- Break rows with cross aisles and confirm widths with the fire marshal.
- Put artists who draw lines at row ends and walls with open floor.
- Write and send your table sharing rules.
- Plan powered tables as a limited add-on near power sources.
- Place the alley on the main path through the building.
- Number tables by row and publish a map fans can search.
FAQ
What size are artist alley tables?
Many comic and anime conventions use 6-foot or 8-foot banquet tables that are 30 inches deep, sold as a full table or split into half tables of 3 or 4 feet. Each table usually comes with one or two chairs and a few feet of space behind it for the artist and their stock. Treat these as planning examples and match them to the tables your venue supplies.
Are back-to-back or wall tables better for an artist alley?
Back-to-back rows fit the most tables, because two rows share one strip of floor behind the artists. Wall tables give artists room for tall displays and grid walls, since nothing blocks the view behind them. Many cons use back-to-back rows in the middle and wall tables around the edge, and they sell wall spots to artists with large displays.
Where should popular artists sit in an artist alley?
Put artists you expect to draw long lines at the ends of rows or along walls, next to open floor where a line can form without blocking neighbors. Mark the line direction with tape or stanchions and tell the artist where it goes. Avoid putting two popular artists side by side, or their lines will merge and block the whole row.
How do you handle table sharing in an artist alley?
Decide before applications open whether artists can share, how many people can sit at one table and whether each sharer needs their own badge. Record sharers on the application so your map and badge list match. A written sharing policy, sent with the acceptance email, prevents most table-day disputes.

