Skip to main content

Convention Centers in Connecticut With Plans

By: Map D
Published: November 18, 2026
Updated November 18, 2026
Tags: event organizertrade showsEvent Managementevent planning
Convention Centers in Connecticut With Plans

Convention centers in Connecticut fall into three groups. Hartford has the state's downtown convention center and an arena; southeastern Connecticut has two casino resorts, Mohegan Sun in Uncasville and Foxwoods in Mashantucket, each with its own expo and convention space; and smaller cities have university arenas and banquet venues that host regional shows. Below are the Connecticut venues that already have ready-made floor plans in Map D's Venue Library, grouped by area and linked to their venue pages so you can open a plan and start your booth layout. First, here is how to choose the right type of building for your show.

Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications. They are approximate, so confirm every measurement, column, door and utility location with the venue before you sell a single booth.

Convention Center, Casino Resort or Arena?

Connecticut is small enough that most of the state can drive to Hartford or the shoreline in an hour or two, so the choice is less about geography and more about the kind of building. Each type changes your costs, your exhibitors' load-in and the kind of attendee you draw, so settle on the type before you compare individual halls.

  • Downtown convention center: An exhibit hall with docks, meeting rooms and nearby hotels. A good fit for association shows, trade shows with education sessions and statewide conferences.
  • Casino resort expo or convention center: Exhibit halls and ballrooms inside a resort with hotel towers, restaurants and entertainment. A good fit for consumer shows, regional expos and conferences that want attendees to stay the night. Expect resort rules on food, labor and room blocks.
  • Arena or university athletic center: A big open floor with seating around it. A good fit for career fairs, sports and hobby shows and community expos, as long as you plan floor protection and work around the sports schedule.
  • Banquet venue: Carpeted rooms built for dinners and conferences. A good fit for a one-day association meeting with a tabletop vendor expo.

What to Check at a Casino Resort Venue

Casino resorts work differently from a public convention center. Ask how attendees get from the parking garages to your hall, and whether that route crosses the gaming floor. Ask about age rules for minors on the walk to the hall, how exhibitor freight reaches the expo floor, which services are exclusive to the resort, and whether your hotel room block, food and beverage minimum and meeting room rent are tied together in one contract. Check what other events, concerts or conventions are booked the same weekend, because they share the garages, docks and elevators with your show.

Worked Example: Will Your Show Fit?

Start with the booths you expect to sell, then add aisles, registration, food, a stage or demo area and storage. A planning assumption many organizers use is that booths take a little under half of the gross hall area once those are added. Your ratio depends on the layout and the fire marshal's rules.

  • Plan used: The Connecticut Convention Center in Hartford, drawn at about 276 x 345 feet, or roughly 95,200 square feet gross.
  • At 45 percent for booths: roughly 42,800 square feet.
  • Booth mix example: 340 booths of 10 x 10 feet (34,000 square feet) plus 10 islands of 20 x 20 feet (4,000 square feet) uses about 38,000 square feet, leaving room for a lounge, food court or demo stage.
  • Compare: The Mohegan Sun Earth Expo Center plan is drawn at about 165 x 288 feet, or roughly 47,500 square feet gross. At the same 45 percent, that is room for roughly 210 booths of 10 x 10 feet, so a 300-booth show would need a second hall or a different venue.

These are planning assumptions, not venue capacities. Run your own mix in the exhibit hall size calculator, and check standard trade show booth sizes before you set your booth menu.

Trade Show Checklist for Connecticut Venues

Use this checklist to choose a hall and lay out an expo in it. The first half is for site visits and contract talks; the second half is for the floor plan itself. Our full list of questions to ask an event venue covers contract terms and costs in more depth.

  1. Get a current CAD or PDF plan of the exact hall, ballroom or arena floor in your contract, not a marketing brochure of the whole venue.
  2. Mark columns, exits, airwalls, floor ports, fire equipment and any areas that must stay clear before you draw a single booth.
  3. Ask how freight reaches the floor, how many docks serve your space, where trucks wait and whether docks are shared with other events.
  4. List the services that are exclusive to the venue, such as electrical, internet, food, cleaning, security and labor, and get the rates in writing. Our guide to trade show union labor explains what to ask.
  5. Ask about room blocks, food and beverage minimums, attrition terms and cut-off dates if a hotel or resort is involved.
  6. For arenas, ask about floor covering, rigging points, seating you can close off and the sports schedule around your dates.
  7. Ask how the venue handles snow removal, and who decides whether to postpone if a nor'easter hits on move-in day.
  8. Set your aisle widths early. Many organizers use 10-foot aisles as a baseline and wider main aisles; see trade show aisle width for the trade-offs, then confirm the minimum with the fire marshal.
  9. Size the booth count with the booth capacity calculator before you promise exhibitors a number.
  10. Confirm move-in and move-out hours, and whether those days are charged as rent.
  11. Send the draft layout to the venue and the fire marshal for review before you open booth sales.

Hartford and Central Connecticut

Hartford sits in the middle of the state, close to I-84 and I-91, which makes it a natural home for statewide association shows. The arena listed in the library as XL Center is now PeoplesBank Arena, according to the arena's own website.

  • [Connecticut Convention Center](/venues/connecticut-convention-center-hartford/), Hartford: the drawn plan spans about 276 x 345 feet, and the venue page lists more plans. A downtown convention center for association shows, trade shows and conferences. Ask which halls each drawing covers before you size your show from it.
  • [XL Center](/venues/xl-center-hartford/), Hartford: the drawn plan spans about 178 x 277 feet. Now named PeoplesBank Arena, it is a downtown arena whose floor can suit consumer and hobby shows. Check the event calendar, floor covering rules and load-in times between games and concerts.
  • [Aqua Turf Club](/venues/aqua-turf-club-plantsville/), Plantsville: the drawn plan spans about 215 x 194 feet, and the venue page lists more plans. A banquet venue in the Plantsville section of Southington that suits association meetings and conferences with a vendor expo.

Mohegan Sun, Uncasville

Mohegan Sun has two convention areas, the Earth Expo & Convention Center and the Sky Convention Center, plus other meeting space across the resort. The library has listings for each, so open the one that matches the space in your contract.

  • [Mohegan Sun](/venues/mohegan-sun-uncasville/), Uncasville: the first drawn plan spans about 196 x 123 feet, and the venue page lists six plans in all. Compare them against the rooms your contract names.
  • [Mohegan Sun Earth Expo Center](/venues/mohegan-sun-earth-exposition-center-uncasville/), Uncasville: the drawn plan spans about 165 x 288 feet. The resort's expo hall, a fit for consumer shows and regional trade shows.
  • [Sky Convention Center at Mohegan Sun](/venues/sky-convention-center-at-mohegan-sun-casino-uncasville/), Uncasville: the drawn plan spans about 274 x 262 feet. Home to the resort's Uncas Ballroom, which suits conferences with an exhibit area and banquet events.

Foxwoods Resort Casino, Mashantucket

Foxwoods has ballrooms and meeting rooms in several parts of the resort, with the Rainmaker Expo Center as its exhibit space. The library lists the resort and the expo center separately; the Rainmaker listing names Ledyard, the town around Mashantucket.

  • [Foxwoods Resort Casino](/venues/foxwoods-resort-casino-mashantucket/), Mashantucket: the drawn plan spans about 223 x 322 feet. Ask which ballroom or meeting level the drawing covers.
  • [Rainmaker Expo Center at Foxwoods](/venues/rainmaker-exposition-center-at-foxwoods-casino-ledyard/), Mashantucket: the drawn plan spans about 186 x 208 feet. The resort's main expo space. Ask for the current plan of the hall you will use, including the pre-function and breakout areas, before you size your show.

Western Connecticut

  • [O'Neil Center](/venues/o-neil-center-danbury/), Danbury: the drawn plan spans about 273 x 233 feet. This is the O'Neill Center at Western Connecticut State University, an athletic and convocation center whose arena floor can suit career fairs, community expos and regional shows. Work around the university's game and academic calendar.

Plan Around Winter and Busy Weekends

Connecticut winters bring snow, ice and the occasional nor'easter, so read the postponement and force majeure terms and publish a weather contact and a decision deadline for exhibitors. At the casino resorts, big concerts and fights fill hotel rooms and garages; in Hartford, games and concerts at the arena and events downtown do the same. Ask the venue and your hotel partners which events overlap your dates before you sign, and give exhibitors parking and unloading instructions that account for them.

How to Start a Layout From a Venue Library Plan

Starting from a drawn plan saves the hours it takes to trace a hall from a PDF. Each venue page in the Map D venue directory shows the plans drawn for that building, their dimensions in feet and a preview.

  1. Open the venue and choose the listing and plan that match the hall or ballroom in your contract.
  2. Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
  3. Check walls, columns, doors and dock doors against the venue's current plan, and trim the drawing to the space you rent.
  4. Block out registration, food, lounges, stages, exits and fire clearances before adding booths.
  5. Lay out booths and aisles in standard sizes and number them in a logical order.
  6. Mark sponsor spots, price booths by size and location, and hold space for returning exhibitors.
  7. Send the layout to the venue and the fire marshal for review before you open booth sales.

For rent, labor and service charges, see how much it costs to rent a convention center. Comparing nearby states? See the companion lists of convention centers in Massachusetts and convention centers in New York.

Common Mistakes When Picking a Connecticut Venue

  • Opening the wrong listing when a resort, like Mohegan Sun, has several plans drawn for different halls and ballrooms.
  • Signing a resort contract without reading how the room block, food minimum and meeting room rent depend on each other.
  • Booking an arena floor without checking the game and concert calendar around move-in and move-out.
  • Choosing winter dates without reading the weather and postponement terms.
  • Selling booths before the fire marshal has reviewed the layout.

Where Map D Fits

Map D is floor plan and booth sales software for organizers. You open a venue plan, then add booths, aisles, sponsor areas and labels in the editor. When the layout is ready, a paid plan lets you publish an interactive map, share it with exhibitors and sell booths online, with exhibitors choosing their own booth at checkout. The same plan runs the rest of the show in Map D's trade show management software, from booth sales and the exhibitor portal to lead retrieval and check-in. Map D does not book venues, quote rates or replace the venue's official plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own show, request a demo or build a free floor plan.

FAQ

Which convention centers in Connecticut have floor plans in Map D's Venue Library?

At the time of writing, the library has plans for the Connecticut Convention Center in Hartford, Mohegan Sun and its Earth Expo Center and Sky Convention Center in Uncasville, Foxwoods Resort Casino and its Rainmaker Expo Center in Mashantucket, the O'Neill Center in Danbury, the Aqua Turf Club in Plantsville and the Hartford arena listed as XL Center. It is not a complete list of every venue in the state.

Are the floor plan dimensions in this article official?

No. The dimensions describe the plans drawn in Map D's Venue Library and are approximate. They are a useful starting point for sketching a layout, but confirm hall sizes, columns, doors, ceiling heights and utilities with the venue before you sell a single space.

Should a Connecticut trade show be in Hartford or at a casino resort?

Hartford's downtown convention center suits association shows and conferences that want a central location and a classic exhibit hall. The casino resorts in southeastern Connecticut keep hotel rooms, restaurants, entertainment and expo space under one roof, which can lift attendance for consumer and regional shows. Compare hall size, labor and service rules, hotel terms and how attendees reach the floor before you decide.

How do I start a floor plan for a Connecticut venue in Map D?

Open the venue page in the Map D venue directory, pick the plan you want, select Use This Floor Plan Free and create a free account. The plan opens in the editor, where you can add booths, aisles and labels. Building the floor plan for one event is free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499.