Skip to main content
Ribbon Cutting Ceremony

Ribbon Cutting Ceremony Script: What to Say and in What Order

Copy-ready 1-minute and 3-minute ribbon cutting scripts, a full order of events with timings, an emcee version, and a checklist for scissors, ribbon, microphone and photographer.

Ribbon Cutting Ceremony Order of Events

A ribbon cutting is a photo moment with a few words around it. The speeches should build to the cut, not compete with it. Decide who speaks, in what order, and who holds the scissors before the guests arrive, because nobody wants to improvise that with a crowd and cameras watching.

Ribbon cutting ceremony order of events
StepWhoTimePurpose
Guests gather, music or minglingHost team10 minutes beforeFill the space, let latecomers arrive
Welcome and mic checkHost or emcee1 minuteQuiet the crowd and set the order
Why this opening mattersOwner or leader2–3 minutesThe main message
Remarks from a guest of honorOfficial, partner or chamber rep1–2 minutesCredibility and community welcome
Thank the builders and partnersOwner or host1 minuteRecognition
Gather at the ribbon, countdown, cutHost1–2 minutesThe moment
Group photoPhotographer2 minutesPress and social shots
Invite guests inHost30 secondsNext step: tour, food, demos
Ribbon cutting ceremony order of events

Add this block to your day's program so the ceremony does not drift. Our run of show template has columns for the cue, owner and time, and the emcee script guide covers transitions between speakers.

Ribbon Cutting Speech: 1-Minute and 3-Minute Scripts

Use this when the host also gives the main remarks and there is a single ribbon moment. Keep your sentences short, because outdoor crowds and echoing lobbies swallow long ones.

Ribbon Cutting Ceremony Program for an Emcee

If you are the emcee rather than the owner, you do not give the main speech. You introduce the speakers and run the cut. Pull your introductions from our speaker introduction script guide.

For a ribbon cutting at a larger event such as a festival, trade show or community launch, shorten everything and anchor it to the clock: 'We cut the ribbon at 10:00, and the doors open right after.' Put the time on the schedule and in the printed program.

Ribbon Cutting Logistics: Scissors, Mic and Photographer

Ribbon cutting logistics checklist
ItemWhat to check
RibbonLong enough for everyone in the photo, with two people holding each end so it stays taut
ScissorsOversized ceremonial scissors, plus a spare; test them on a scrap of the same ribbon beforehand
MicrophoneCheck the sound at the speaking spot and at the ribbon; keep a spare battery
PhotographerBrief them on the order, the countdown and where the guest of honor will stand
Order of speakersConfirm each speaker's name, title and how it is pronounced; agree their time limit
Crowd positionMark where guests stand so the photographer has a clear line and nobody blocks the entrance
Weather planA covered option and a time to decide, if the ceremony is outdoors
After the cutOpen the doors, start the music or refreshments, and have a team member ready to guide guests
Ribbon cutting logistics checklist
  • Hold the ribbon at waist height, not the floor, so it shows in photos.
  • Count down out loud with the crowd so the cut and the camera flash line up.
  • Cut once, then hold the pose for a few seconds for the photographer.
  • Save the cut ribbon pieces as souvenirs for the guest of honor and the team.

Ribbon Cutting Mistakes to Avoid

  • Making the speeches longer than the cut; guests came to see the moment, so aim for under 10 minutes of talking
  • Not rehearsing the countdown, which leaves the cut ragged and the photographer guessing
  • Introducing speakers with mispronounced names or the wrong title
  • Forgetting to say what happens next, so guests stand around instead of heading inside
  • Inviting too many people to the ribbon; five to eight fit one photo frame without hiding anyone
  • Skipping the thank-yous to the builders and partners who finished the project
How Map D Helps

Map the Grand Opening Behind the Ribbon

A grand opening is more than the ribbon. Guests walk in afterward, looking for the demos, vendors and food. Map D's editor is free to build one event, so you can lay out the venue and booths and share the plan with your team. Publishing it, the app and booth sales need a paid plan, from $3,499 per event.

  • Draw the venue, entrance, vendor booths and food areas on an interactive floor plan with our event floor plan software
  • Build the editor layout for one event free; publishing needs a paid plan
  • Show guests where to go after the cut with the published floor plan and schedule in the app
  • Keep the ceremony time and the rest of the day in one program; see the run of show template
See it on your own floor plan

Stop reading about it. Build one.

Upload the floor plan you already have and place your booths on it yourself, in Map D’s editor. Free to build, no contract, and nothing to install.

900+
Organizers who have run shows on Map D
9,000+
Events powered since 2011
1.8M+
Booths drawn to date

“I am really excited about this. The staff met with me this morning and we all LOVE the platform. People are already filling out their booths.”

· Director, International Trade and Development @ Maine Insurance Agents Association
FAQ

Questions Organizers Ask

What do you say at a ribbon cutting?

Welcome everyone, say what is opening and why it matters, thank the people who made it happen, then invite the guests forward: 'Please join me at the ribbon. On three, we make it official. One, two, three.' Keep the speech under three minutes so the ribbon is the main event.

What is the order of events at a ribbon cutting ceremony?

Typical order: host welcome, a short speech from the owner or leader, remarks from a guest of honor such as a mayor or chamber representative, thanks to builders and partners, the ribbon cutting itself, a group photo, then an invitation to tour or enjoy refreshments.

How long should a ribbon cutting ceremony be?

The full ceremony usually takes 10 to 20 minutes. Allow one to three minutes per speaker, one to two minutes for the cut and photos, and extra time for guests to arrive. Hold the start for five minutes at most; people leave if the ceremony drags.

Who speaks at a ribbon cutting?

The host or emcee, often the business owner, organization leader or a chamber of commerce representative, opens and runs the ceremony. The owner or leader gives the main remarks, and a guest of honor, such as an official or major partner, is often given the scissors first.

What do you need for a ribbon cutting?

Oversized ceremonial scissors, a ribbon long enough for everyone in the photo and held taut by two people at each end, a wireless or handheld mic, a spare pair of scissors, and a photographer briefed on the moment. Test the scissors on the ribbon beforehand so it cuts cleanly.