Skip to main content
Association Booth Pricing

Member vs Nonmember Booth Pricing: Example Spreads, Rate Table and Policy Wording

How associations set member and nonmember booth rates, with example spreads and the dues test, ways to verify membership at booking, early-bird stacking, a copy-ready rate table and policy wording, and how the spread drives non-dues revenue.

How Member vs Nonmember Booth Pricing Works

Most association trade shows publish two prices for every booth: one for members and a higher one for everyone else. The gap does two jobs. It rewards the companies that pay dues, and it gives nonmember exhibitors a reason to join. Get it wrong in one direction and members feel the discount is token; get it wrong in the other and nonmember suppliers, who often fill a large share of the floor, stay home.

  1. Set the member rate first, from your costs, revenue target and comparable shows
  2. Add the nonmember premium as a percentage or a flat amount per booth
  3. Run the dues test: compare the premium on a typical booth with a year of dues
  4. Decide how the spread interacts with early-bird, premium location and multi-booth pricing
  5. Write the membership rules (who counts, when it is checked, what happens if it lapses) before sales open

This page covers the member and nonmember spread only. For setting the base rate per square foot, see the trade show booth pricing guide; for corners, islands and other location premiums, see premium booth pricing; and for laying every price out on one page, use the booth rate card template.

Setting the Spread: Example Percentages and the Dues Test

There is no standard spread. The table below shows three example approaches on a 10x10 inline booth with an assumed member rate of $2,000 and assumed annual dues of $600. The figures are illustrations, not benchmarks: replace them with your own rates and dues.

Example member vs nonmember spreads (assumed $2,000 member rate and $600 dues)
ApproachNonmember ratePremiumPasses the dues test?When it fits
Light spread, example 15%$2,300$300No, joining costs more than the premiumShows that rely on nonmember suppliers and want them back
Middle spread, example 25%$2,500$500Close, joining costs $100 moreMost association shows testing a first spread
Strong spread, example 40%$2,800$800Yes, joining saves $200Associations that want the show to drive membership
Flat premium, example $750 per booth$2,750$750Yes, joining saves $150Shows with many booth sizes that want one simple rule
Example member vs nonmember spreads (assumed $2,000 member rate and $600 dues)
  • Check last year's mix: if nonmembers bought a large share of booths, a big jump in their price is a risk to floor revenue
  • Compare the spread with similar association shows in your industry before you publish
  • Keep the spread the same for a few years where you can, so exhibitors can budget
  • Model the change with the exhibitor pricing calculator before you commit

How to Verify Membership at Booking

A member rate only works if someone checks membership. Checking after the invoice goes out leads to corrected invoices, awkward emails and refunds. These are the common ways to check, from strongest to weakest.

Ways to verify membership at booking
MethodHow it worksTrade-off
AMS sign-in at checkoutThe buyer signs in with their association account and the system confirms a current membership before member prices appearNeeds an integration with your AMS
Access code sent to membersMembers get a code by email that unlocks member pricesCodes can be forwarded, so audit bookings against the roster
Roster check before invoicingStaff check each member booking against the membership list before billingManual and slow at peak booking times
Honor system with a policyThe exhibitor ticks a box saying they are a member, and the policy lets you bill the differenceEasy to set up, easy to abuse
Ways to verify membership at booking

Our post on AMS integration for association events explains how the sign-in check works and what to ask your AMS vendor.

Early-Bird Stacking: How Member and Early Rates Combine

Member and early-bird pricing almost always meet. You have three common choices. Whichever you pick, publish all four prices so nobody has to do the maths.

  1. 1

    1. Full stacking

    Members and nonmembers both get an early rate, and the member spread applies to each. The lowest price is member early bird; the highest is nonmember standard. Simple and common.

  2. 2

    2. Members-only early bird

    Only members get an early rate. Nonmembers pay one price all year. This makes the member benefit larger and pushes members to book first, often before the floor opens to everyone.

  3. 3

    3. Priority instead of price

    Members get priority booth selection or an earlier sales window at the standard member rate, instead of a lower price. Useful when the floor sells out without discounts.

Example stacked rates for a 10x10 inline booth (example 25% spread, example early rate 10% lower)
RateMemberNonmember
Early bird (until [DATE])$1,800$2,250
Standard$2,000$2,500
Corner premium (example)+$250+$250
Example stacked rates for a 10x10 inline booth (example 25% spread, example early rate 10% lower)

If you also run promo codes or multi-booth discounts, say whether they combine with the member rate. A common rule is that the member rate always applies and other offers stack on top only where stated. See early bird registration for setting the deadline itself.

Copy-Ready Rate Table and Policy Wording

Paste this into your prospectus or onto the floor plan's pricing page and fill in the brackets. Replace every example price with your own.

This is a starting point, not legal advice. Make sure the wording matches your exhibitor agreement and membership bylaws.

The Non-Dues Revenue Angle

Exhibit sales are one of the largest non-dues revenue lines for many associations, and the member spread sits right in the middle of it. Treated well, the spread brings in nonmember revenue and new members at the same time.

  • Offer a join-and-exhibit bundle: one year of dues plus the member booth rate, priced below the nonmember booth rate alone
  • Put the dues amount beside the nonmember price so exhibitors can see when joining pays for itself
  • Track how many nonmember exhibitors join each year, not just booth revenue
  • Hand new member exhibitors to the membership team after the show, so the second year is a renewal, not another sale
  • Use members-only booth areas or first choice of space as a benefit that doesn't cut price

For more ways to grow revenue beyond dues, read non-dues revenue ideas for association events. To see how member pricing, exhibitor forms and the floor plan fit together, see exhibitor management software and association event management.

How Map D Helps

Sell Member and Nonmember Booths From One Floor Plan

Map D sells booths from a to-scale interactive floor plan, and each booth type can carry more than one price. Registration types decide who sees which price: members can sign in through the NOVI AMS integration so a current membership is confirmed before member prices appear, or you can send an access code that unlocks its own prices and booth types. Dated prices handle a member early-bird rate, and discount codes let you decide which offers can stack. Building the floor plan for one event is free; publishing the map and selling booths need a paid plan (Basic starts at $3,499).

  • A base price and a member rate on the same booth type
  • NOVI member login, so only current members see member pricing
  • Access codes with their own prices for allied members or partners
  • Dated prices for member and nonmember early-bird deadlines
  • Members-only booth types, such as a row kept for members
  • Payments through Stripe, Authorize.Net, PayPal and other gateways
See it on your own floor plan

Stop reading about it. Build one.

Upload the floor plan you already have and place your booths on it yourself, in Map D’s editor. Free to build, no contract, and nothing to install.

900+
Organizers who have run shows on Map D
9,000+
Events powered since 2011
1.8M+
Booths drawn to date

“I am really excited about this. The staff met with me this morning and we all LOVE the platform. People are already filling out their booths.”

· Director, International Trade and Development @ Maine Insurance Agents Association
FAQ

Questions Organizers Ask

How much more should nonmembers pay for a booth?

There is no industry standard. Associations pick a spread that rewards members without pricing nonmembers out of the show. The examples in this guide use 15, 25 and 40 percent above the member rate. A useful check is the dues test: if the nonmember premium on a typical booth is about the same as or more than annual dues, a nonmember company has a reason to join before it books.

Is the member rate a discount or is the nonmember rate a premium?

Most associations price from the member rate up, so the member rate is the base and nonmembers pay a premium. Writing it that way keeps the member rate tied to your costs and revenue target, and frames the nonmember price as a premium rather than the member price as a discount off an inflated number.

How do you verify membership when exhibitors book a booth?

Check it at the moment of booking, not after. The cleanest way is an association management system (AMS) sign-in or lookup at checkout, so only current members see the member price. Without that, send members an access code, or check each booking against your member roster before the invoice goes out and bill the difference when a company isn't current.

Can member and early-bird booth discounts be combined?

Decide and publish it. Many associations let member and early-bird pricing combine, so the lowest rate is member early bird and the highest is nonmember standard. Others give nonmembers no early-bird rate at all. What causes disputes is an unstated rule, so put all four prices in the rate table with the date the early rate ends.

What happens if an exhibitor's membership lapses before the show?

Say it in the policy. A common approach is that membership must be current when the booth is booked and on the show dates, and a company whose membership lapses before the show is billed the difference between the member and nonmember rates. Some associations let the company renew instead of paying the difference.