Skip to main content

Gun Show Layout: Tables, Aisles and Entry

By: Map D
Published: November 19, 2026
Updated November 19, 2026
Tags: event organizerhow toBooth SalesShow Management Tipsevent planning
Gun Show Layout: Tables, Aisles and Entry

A good gun show layout puts a controlled public entrance with a firearm check point and ticketing at one end of the hall, rows of 8-foot dealer tables along wide aisles, a separate exhibitor entrance and load-in, clearly marked exits kept open, and support areas like concessions, restrooms and any transfer or paperwork area placed so they do not block traffic. Start from a to-scale drawing of the hall, place the entrance and security first, then fill the floor with table rows. This guide walks through each step from an organizer's point of view and ends with a sample plan and a checklist.

This is an operations guide, not legal advice. Federal, state and local laws and the venue's own rules govern firearm sales, transfers, carry and storage at a gun show, and they differ by location. Work with the venue, local law enforcement and qualified legal counsel on the rules, then use the layout to carry them out. If you are earlier in the process, start with how to plan a gun show, and for pricing the tables you draw here, see gun show table prices.

Why Gun Show Layouts Are Different

  • Entry control: Visitors may arrive carrying firearms they plan to sell or trade, so the entrance needs a check point that every visitor passes.
  • Security throughout: Most shows contract security or off-duty officers, who need posts, sight lines and a quick route to every part of the hall.
  • Table-based selling: Space is sold by the table rather than by the booth, so the plan is a grid of table runs rather than booths with walls.
  • High-value inventory: Dealers want secure load-in and load-out, and many stay with their tables overnight or need the hall locked between show days.
  • Different seller types: Licensed dealers, private collectors and non-firearm vendors (knives, optics, ammunition, accessories, apparel, jerky) often share the room.

Step 1: Get the Hall Drawing and Venue Rules

Ask the venue for a to-scale floor plan and its rules for firearm events before you draw a table. Collect:

  • Hall dimensions, columns, doors, exits and loading doors.
  • Table and chair inventory, with table sizes, and what the venue charges.
  • Power outlets for dealers who need lights or card readers.
  • The venue's firearm event policy: entry checks, ammunition rules, overnight security and insurance requirements.
  • Any requirements from local law enforcement or the fire marshal for crowd size, exits and aisles.

Measurements in this guide are planning examples. The local fire code and the authority having jurisdiction decide aisle widths, exits and occupancy. Share your draft with the venue and fire marshal early; our guide to fire marshal floor plan requirements lists what reviewers usually look for.

Step 2: Design the Public Entrance and Check Point

The entrance is the most important part of a gun show layout. Plan it as a sequence that every visitor walks through in order:

  1. Queue area: Room for a line outside or in the lobby that does not block exits or the sidewalk. Use stanchions to shape it.
  2. Firearm check point: A table or lane where security inspects any firearm a visitor brings in and secures it according to your show policy, before the visitor pays. Agree with your security provider on where a safe direction is and how the check point is staffed.
  3. Ticket and ID desk: Ticket sales, pre-paid ticket scanning and any ID or age checks your policy requires.
  4. Hand stamp or wristband: So visitors can leave and come back without going through the full line.
  5. Open landing zone: Keep the first 15 to 20 feet inside the door clear of tables so people can get their bearings.

Post your entry rules on signs in the queue, on the website and on tickets so visitors arrive ready. Keep the exit route out of the hall separate from the entry line if the venue allows, so departing visitors carrying purchases do not walk back through the check point.

Step 3: Set a Separate Exhibitor Entrance

Dealers bring in high-value inventory on carts and dollies. Give them a separate entrance, close to the loading dock or vendor parking, with its own check-in desk where staff confirm table assignments and hand out exhibitor badges. Schedule load-in by section so the dock does not jam, and plan load-out the same way. If the show runs more than one day, confirm with the venue who secures the hall overnight and where security is posted.

Step 4: Lay Out Table Rows

Most gun shows sell space by the 8-foot table, about 30 inches deep, with dealers behind the tables and buyers in the aisle. Common table arrangements include:

  • Straight runs: Tables end to end in long rows, with a dealer aisle of a few feet behind them. Simple, and it fits the most tables.
  • Back-to-back runs: Two rows of tables sharing one dealer aisle, facing out to two public aisles.
  • U-shapes and squares: Three or four tables arranged around a dealer, often sold as a corner or premium space.
  • Wall runs: Tables along the walls with the dealer between the table and the wall, useful for long-gun displays on racks.

Break long runs every 8 to 10 tables with a cross aisle so visitors are not trapped in a single direction and security can move through quickly. Leave space behind tables for dealer chairs, boxes and display racks, and do not let racks or boxes spill into the public aisle.

Step 5: Size the Aisles

Gun show aisles fill fast because buyers stop at tables to look and handle items. As a planning example, many organizers start with main aisles of about 10 feet, and wider aisles near the entrance, concessions and any busy corner. Dealer aisles behind tables can be narrower, but they still have to meet the venue's rules. Our guide to trade show aisle width explains how to set widths and what fire marshals look at, and the egress width calculator helps you check exit capacity for your expected crowd.

Step 6: Group Dealer, Private and Non-Firearm Tables

Mark each table on the plan by seller type and category, then group them so buyers and staff know what is where:

  • Licensed dealer tables: Often the largest section, and the one most buyers come for.
  • Private-seller or collector tables: Many shows group these in their own area. The rules that apply to private sales vary by location, so set your policy with the venue and legal advice.
  • Transfer or paperwork area: If your show or its dealers handle transfers on site, give that work a quiet area with tables and chairs, away from the entrance line.
  • Non-firearm vendors: Knives, optics, holsters, apparel, books and food items. These can be spread through the hall to keep every aisle interesting.
  • Ammunition and reloading: Check the venue's rules on ammunition sales and storage before you place these tables.

Step 7: Place Security, Exits and Support Areas

Mark security posts on the plan: the check point, the main entrance, the exhibitor entrance, the exits and one or two roving positions with a view down the main aisles. Keep every exit and the path to it clear of tables, racks and lines. Then add the support areas:

  • Concessions and seating: Toward the back or a side wall so visitors walk past tables to reach food.
  • Restrooms: Note their location on the map and keep the path to them open.
  • Show office: Near the entrance, for lost items, dealer questions and staff.
  • First aid: A marked location that responders can reach from outside.

Step 8: Use a Sample Plan as a Starting Point

Here is a sample plan for a hypothetical show in a hall of about 120x240 feet. Treat it as a planning example, not a standard:

  • Public entrance on one short wall, with a stanchioned queue in the lobby, a firearm check lane, two ticket windows and a 20-foot open landing zone.
  • Exhibitor entrance and dock on the opposite short wall, with a dealer check-in desk.
  • About 300 tables of 8 feet in back-to-back runs, broken by cross aisles every 9 tables, with 10-foot public aisles.
  • Wall runs on both long walls for long-gun dealers with display racks.
  • Private-seller section in one back corner, a paperwork area beside the show office and concessions with seating along one side wall.
  • Security posted at both entrances, the check lane, each exit and two roving positions.

Step 9: Number Tables and Publish the Map

Number tables in runs so dealers and buyers can find them: a letter or number for each row and a number for each table, running in the same direction across the hall. Corner and premium spaces should be easy to see on the map. Dealers return year after year and often want the same tables, so keep numbers stable between shows.

With event floor plan software like Map D, you draw the hall to scale, set table types with their own sizes, prices and colors, number every table and mark the entrance, check point and exits. Building the floor plan for one event is free; publishing the map so dealers can pick tables and pay online needs a paid plan.

Gun Show Layout Checklist

  1. Get the to-scale hall drawing, table inventory and the venue's firearm event policy.
  2. Confirm legal requirements with law enforcement and counsel; do not rely on a layout guide for them.
  3. Design the public entrance: queue, firearm check point, tickets and an open landing zone.
  4. Set a separate exhibitor entrance and a load-in schedule.
  5. Lay out 8-foot table runs with cross aisles every 8 to 10 tables.
  6. Confirm aisle and exit widths with the venue and fire marshal.
  7. Group dealer, private-seller and non-firearm tables and place any paperwork area.
  8. Mark security posts, exits, concessions, restrooms and first aid.
  9. Number tables and publish the map for dealers.

FAQ

How big is a table at a gun show?

Most gun shows sell space by the 8-foot table, usually about 30 inches deep, with the dealer standing behind it. Some shows also offer 6-foot tables or corner and wall spaces with several tables together. Ask your venue or rental company what tables they supply, and size the floor plan from the actual table dimensions.

How wide should aisles be at a gun show?

Gun shows are crowded and buyers stop at tables to handle items, so many organizers plan main aisles of about 10 feet as a starting point, with wider space near the entrance and concessions. The venue and the local fire marshal set the real minimum aisle and exit widths, so confirm them before you sell tables.

Where should firearms be checked at a gun show?

Most shows set up a check point just inside or outside the public entrance, before the ticket line, where staff or security inspect any firearm a visitor brings in and secure it according to show policy. Give the check point its own lane and a safe direction area agreed with your security provider, and keep it separate from the exhibitor entrance.

Do gun show layouts separate dealers and private sellers?

Many shows group licensed dealer tables and private-seller or collector tables in different areas so buyers know what they are walking into and so staff can manage any transfer or paperwork area. What rules apply to each sale depends on federal, state and local law and the venue, so set your table policy with the venue and legal advice.