Skip to main content

Gem Show Booth Prices: How to Set Them

By: Map D
Published: November 19, 2026
Updated November 19, 2026
Tags: event organizerBooth SalesRevenueGenerationhow toShow Management Tips
Gem Show Booth Prices: How to Set Them

Gem show booth prices are usually set two ways: a flat price per table for small dealers and a flat rent per booth size, such as a 10x10 or 10x20, for dealers with large specimens and several cases. Both are built from your costs, which at a gem and mineral show include more security than most events. On top of base rent, organizers commonly charge for showcases, lighting and electricity, corner locations, extra tables and, at shows with trade days, access to wholesale buyers. To set your rates, total your costs, subtract admission and other income, and divide the rest across the tables and booth space you can sell. Every dollar figure in this guide is a planning example, not a market rate, because gem show rents vary widely by market and show type.

If you are still choosing a venue, dates and a dealer mix, start with our guide on how to plan a gem and mineral show. To test your numbers as you go, use the vendor fee calculator.

What Makes Gem Show Pricing Different

  • Small items, high value. Cut stones, gold, silver and fine specimens are easy to pocket, so security is a real line in your budget, not an afterthought.
  • Displays depend on locked cases and light. Dealers sell from glass showcases and need good lighting to show color and clarity, which means power at most spaces.
  • Dealer needs vary. A bead seller may want one 6-foot table, while a fossil or mineral dealer may want a 10x20 with floor pieces and several cases.
  • Two buyer groups. Retail collectors and families come for the experience; wholesale buyers, such as jewelers and shop owners, come to stock up. Each has a different value to dealers.
  • Many shows are club-run. Gem and mineral clubs often host shows to fund their activities and include free club, education and demonstration tables.

Step 1: Total Your Show Costs

  • Venue: Hall rental for setup, show and teardown days, plus required venue labor, cleaning and any venue security requirements.
  • Security: Guards during show hours and overnight, controlled entrances, and any bag check or escort service you offer at load-out.
  • Tables and booth build: Tables, linens, chairs, pipe and drape, and booth signs.
  • Electricity and lighting: Power drops, which venues often charge per outlet or circuit.
  • Showcases: Rental, storage and transport of glass cases if you supply them.
  • Advertising: Ads in hobby publications and club newsletters, social media, signs and email to past buyers.
  • Staff and volunteers: Gate staff, a show chair, floor helpers and anyone checking wholesale credentials.
  • Insurance, permits and software, plus contingency: About 10 percent, as a planning assumption.

Subtract income from admission, sponsors, raffles or silent auctions, kids' activities and any club fundraising. What remains, plus any target profit or club fund, is what dealer rent must cover.

Step 2: Decide on Tables, Booths or Both

Selling by the table is simple and fits more dealers into a smaller hall. Selling by the booth gives dealers with big displays room for cases, floor pieces and a back table. Many shows do both, with a table section and a booth section on the same floor. Draw the hall to scale first, with aisles wide enough for crowds stopping at cases, clear exits and a secure route for load-in. An interactive floor plan lets dealers see table and booth sections, sizes and prices on one map before they book.

Price the two so they line up. Work out a rate per square foot from your costs, then apply it to a table space (the table plus the floor behind it) and to each booth size. A booth should cost clearly more than a table, because it uses much more floor.

Step 3: Turn Costs Into Table and Booth Rates

Divide what dealer rent must cover by the square footage you expect to sell. As a planning assumption, a first-year show might budget on 80 percent sold, and an established show with a waitlist can plan closer to full. Multiply your rate by each space size, round to clean numbers, and give larger booths a slightly lower rate per square foot to reward dealers who fill more of the hall.

Step 4: Price Case Security and Overnight Protection

Security is the biggest cost difference between a gem show and most other vendor events, and dealers judge shows on it. Decide what you provide and say so clearly in your dealer packet:

  • Guards during show hours at entrances and on the floor.
  • Overnight security for multi-day shows, so dealers can leave stock in locked cases instead of packing out every night.
  • A locked hall after closing, with no one admitted until a set time before opening.
  • Controlled dealer entry, such as dealer badges that are checked at the door.
  • Load-in and load-out rules that keep vehicles and dealers in a defined, monitored area.

Most shows build hall security into base rent, because every dealer benefits. Dealers usually remain responsible for insuring their own inventory. Put your security terms and liability limits in the dealer agreement and check the wording with your insurer.

Step 5: Price Wholesale and Retail Days

If your show runs both wholesale and retail sessions, decide how dealers buy into them:

  • Full run. One rent covers wholesale and retail days. This is simplest and keeps the floor full every day.
  • Wholesale-only space. Some shows run a separate wholesale section or hall with its own rates for dealers who only sell to the trade.
  • Retail-only space. A lower rate for dealers who only want public days, if you can fill their space on wholesale days.
  • Buyer verification. Wholesale days only work if you check credentials, such as a business license or resale certificate, at registration. Budget for the staff time.

Sales tax rules for dealers at temporary shows vary by state, and some states require dealers to register or hold a permit before selling. Check with your state revenue department and tell dealers what they need. Your exhibitor portal is a good place to collect seller permits and signed agreements before the show.

Step 6: Price Corners, Showcases and Other Add-Ons

  • Corners and prime spots: Corners, end caps and booths by the entrance carry a premium. As a planning assumption, 10 to 20 percent over base rent is a reasonable starting point. See our premium booth pricing page for more.
  • Showcases: Rent glass cases per case for the run of the show, and limit inventory to the cases you have.
  • Electricity: Per outlet or circuit, with a higher price for a second circuit.
  • Extra tables and linens: A flat fee per item beyond what the space includes.
  • Club and education tables: Many club shows give demo, education and kids' tables free, because they bring families in.

Worked Example: A Three-Day Gem and Mineral Show

As a planning example, a club runs a three-day show with one wholesale day followed by two retail days. Costs come to $36,000, including the hall for four days, tables, drape, advertising, staff and $7,000 for daytime and overnight security. Admission, raffles and sponsors bring in $12,000, so dealer rent must cover $24,000, plus $4,000 for the club's education fund, for $28,000 in total.

The floor holds 60 table spaces of 8x8 feet (one 6-foot table with room behind it), 30 booths of 10x10 and 12 booths of 10x20, which comes to 9,240 square feet of sellable space. Planning on 85 percent sold, the club expects to sell about 7,850 square feet, or about $3.57 per square foot. A table space works out to about $228 and is set at $225, a 10x10 at $360 and a 10x20 at $695, slightly less per square foot for the larger booth. Corners carry a 15 percent premium.

Add-ons are priced separately as planning examples: a showcase at $50 for the show, an outlet at $45 and an extra table at $20. A jeweler on a table space with one showcase and one outlet pays $320. A mineral dealer in a 10x20 corner with three showcases and power pays $799 for the booth, $150 for cases and $45 for power, or $994 in total. Security is in every rent, so no dealer pays separately for the guard at the door.

Write Clear Dealer Terms

  • Deposit and balance: For example, 50 percent at booking, with the balance due 45 days before the show.
  • Rebooking: Returning dealers get first right to their space until a set date.
  • Disclosure rules: Require dealers to disclose treatments, synthetics and imitations on labels or at the point of sale, and say what happens if they do not.
  • Security and liability: State what security you provide and that dealers insure their own stock.
  • Teardown: No packing up before closing on the last day.

Selling Gem Show Space Online

Dealers want to see where their table or booth sits, how close it is to the entrance and who is next to them. A to-scale map with every space priced and marked sold as it sells saves you from managing it all by phone and email. Map D's booth sales software lets dealers pick a table or booth, add showcases and power and pay online, while you hold spaces for returning dealers. You can build the floor plan for one event free; publishing the map and selling space need a paid plan. Map D does not set your rates, verify wholesale buyers or provide security, so set your numbers and terms first with the steps above.

FAQ

How much does a booth at a gem and mineral show cost?

There is no standard price. Gem show booth cost depends on the venue, the market, the number of show days, whether the show is retail, wholesale or both, the space size and what is included, such as tables, drape, lighting, electricity or overnight security. A one-day club show in a community hall and a multi-day wholesale show in a major market are priced very differently. Build your rates from your own costs and compare them with similar shows in your region.

Should a gem show sell tables or booths?

Many shows sell both. Tables suit small dealers selling cut stones, beads, jewelry and small specimens, and they let you fit more dealers into a smaller hall. Booths suit dealers who bring large specimens, fossils, furniture-size pieces or several showcases. Price tables per table and booths per size, and make sure a booth costs enough more than a table to reflect the extra floor space.

Who pays for security at a gem show?

Usually the organizer pays for hall security, including guards during show hours and overnight, controlled entrances and a locked hall after closing, and builds that cost into dealer rent. Dealers are usually responsible for their own inventory insurance and for locking their own cases. State in your dealer agreement what security you provide and that you are not liable for dealer losses, and check the wording with your insurer.

How do wholesale days work at a gem show?

On wholesale days, only verified trade buyers are admitted, usually with a business license, resale certificate or tax ID, and dealers sell at wholesale prices. Retail days are open to the public. Some shows run wholesale only, some retail only, and some run wholesale days before opening to the public. Dealers who want both buyer groups often pay more for a full-run booth, and you need a way to check buyer credentials at the door.