Fairgrounds in North Carolina With Floor Plans

Fairgrounds in North Carolina range from the North Carolina State Fairgrounds in Raleigh, with hundreds of acres and several exhibit buildings, to regional grounds such as the Western North Carolina Agricultural Center near Asheville and the Winston-Salem Fairgrounds in the Triad. Below are the North Carolina fairgrounds and expo halls that already have ready-made floor plans in Map D's Venue Library, grouped by region and linked to their venue pages so you can open a plan and start your vendor layout. First, here is how to choose a fairground for a vendor show, expo, craft fair or market.
Dimensions in this article come from the plans drawn in Map D's Venue Library, not from official venue specifications, so confirm every measurement, door and utility location with the venue before you sell a single space. Map D does not book venues or quote rates. If you need a convention hall instead, see convention centers in North Carolina.
How to Choose a North Carolina Fairground for Your Event
Fairgrounds suit events that need big floors, drive-in doors and plenty of parking: home and garden shows, gun and outdoor shows, craft fairs and holiday markets, antique and collector shows, farm and equipment shows, horse and livestock events and food festivals. Rent is often lower than at a convention center, but the rental may include less, so compare what each quote covers.
1. Size the Show Before You Tour
Count vendor spaces by size, then add aisles, food, stages, restrooms, first aid and the show office. The exhibit hall size calculator turns a vendor mix into the gross space you need. Treat the result as a planning assumption to check against the fire marshal's rules.
- Plan used: The Agri Supply Exposition Center at the North Carolina State Fairgrounds, drawn at about 169 x 289 feet, or roughly 48,800 square feet gross.
- At about half for vendor spaces: roughly 24,400 square feet.
- Vendor mix example: 200 spaces of 10 x 10 feet (20,000 square feet) plus 15 spaces of 10 x 20 feet (3,000 square feet) uses about 23,000 square feet, leaving some room for a food area and a demo stage.
- Compare: Liberty Hall at The Park Expo in Charlotte is drawn at about 498 x 249 feet, or roughly 124,000 square feet gross. At the same ratio, that is room for roughly 600 spaces of 10 x 10 feet on paper, a size for a large consumer show.
2. Exhibit Buildings, Arenas and Outdoor Lots
- Exhibit building or event center: Best for vendor shows, craft fairs, holiday markets, gun shows and consumer expos. Ask whether it is heated and air-conditioned on your dates, including setup days.
- Arena or livestock barn: Covered space for horse and livestock shows, car shows and food festivals. Ask about the floor surface, lighting, ventilation and drainage.
- Outdoor lots and lawns: Good for food trucks, rides, equipment displays and overflow vendors. Ask about surface, power pedestals and how the ground drains after a summer storm.
3. Load-In, Parking and RVs
Ask how vendors reach each building, how many drive-in doors there are, where trailers park and how long the setup window is. Many fairgrounds have camping areas used during their own fair; ask whether vendors who stay on site can park RVs on your dates. In the mountains, give vendors extra time for winding roads and winter weather. Write a vendor load-in schedule once you have the answers.
4. Power, Water and Restrooms
Food vendors, demo booths and ride operators need power, and many need water. Mark power drops and water hookups on the plan before you number spaces, and charge for power as a separate line on the vendor application. For outdoor areas, size restrooms with the portable toilet calculator and handwashing with the handwashing station calculator.
5. Aisles and Fire Code
Fairground buildings still need a code-compliant layout. Keep exits clear, check your trade show aisle width, mark fire equipment and review the fire marshal floor plan requirements before you submit. For craft and market layouts, our guides to vendor market layout and how to lay out a craft fair cover aisles, corners and flow.
6. Heat, Storms and Hurricanes
North Carolina summers are hot and humid, with afternoon thunderstorms, and the Atlantic hurricane season runs from June through November. For any event with outdoor space, plan shade, water and an indoor fallback, and decide in advance who calls a delay for lightning or high wind. Tents need proper ballast; the tent weight calculator gives a starting point to check with your tent supplier.
Questions to Ask a North Carolina Fairground Before You Sign
Use this list on site visits, and see our full list of questions to ask an event venue for contract terms and costs.
- Which buildings, arenas and outdoor lots does the rental include, and can you send a current site plan with dimensions?
- Is the building heated and air-conditioned on our dates, including setup and teardown days?
- Where are the doors, power drops, water hookups and restrooms, and which areas must stay clear?
- Where do vendor trucks, trailers and RVs park, and are hookups included?
- What happens to our contract if a storm or other emergency closes the grounds on our dates?
- Which services are exclusive to the venue, such as food, security, cleaning or electrical?
- What other events are on the grounds on our dates, and how will gates and parking be shared?
- What insurance and certificates do you require from us and from our vendors?
North Carolina State Fairgrounds, Raleigh
The North Carolina State Fairgrounds host the N.C. State Fair each October and rent buildings the rest of the year. The N.C. Department of Agriculture's booking page lists more than 300 acres and 400,000 square feet of building space for rent, including the Agri Supply Exposition Center, the Governor James G. Martin Building, the Governor James E. Holshouser Building, the Jim Graham Building and Dorton Arena.
- [North Carolina State Fairgrounds, Exposition Center](/venues/north-carolina-state-fairgrounds-exposition-center-raleigh/), Raleigh: the drawn plan spans about 169 x 289 feet, the plan used in the sizing example above. A fit for gun shows, home shows, craft fairs and collector shows. The library has a second listing, North Carolina State Fairgrounds in the Exposition Center, with a nearly identical drawing; either one works as a starting canvas.
Western North Carolina Agricultural Center, Fletcher
The WNC Agricultural Center in Fletcher, south of Asheville, is home to the N.C. Mountain State Fair each September. Its website lists the Expo Building, the Davis Event Center and McGough Arena, with stalls, barns and outdoor rings, for rent. The library has four listings for the grounds; open the one that matches the building in your contract.
- [Western North Carolina Agricultural Center, Expo Building](/venues/western-north-carolina-agricultural-center-exposition-building-fletcher/), Fletcher: the drawn plan spans about 143 x 277 feet. A second listing, WNC Ag Center Expo Building, is drawn at about 165 x 129 feet and likely shows part of the building, so compare the two.
- [Davis Event Center at WNC Agricultural Center](/venues/davis-event-center-at-wnc-agricultural-center-fletcher/), Fletcher: the drawn plan spans about 114 x 162 feet. The newer event building on the grounds, which suits craft shows, home shows and regional expos.
- [Western North Carolina Agricultural Center](/venues/western-north-carolina-agricultural-center-fletcher/), Fletcher: the drawn plan spans about 137 x 261 feet. Ask which building this drawing covers before you size your show from it.
Winston-Salem Fairgrounds
The Winston-Salem Fairgrounds host the Carolina Classic Fair each fall, which the fairgrounds describe as North Carolina's second-largest agricultural fair. Its website lists several rentable venues, including the Fairgrounds Arena, the Annex, the Event Center and Education Building, the Farmers Market Building and the Home and Garden Building.
- [Winston-Salem Fairgrounds, The Annex](/venues/winston-salem-fairgrounds-annex-winston-salem/), Winston-Salem: the drawn plan spans about 173 x 285 feet. The fairgrounds list the Annex and the Fairgrounds Arena as separate venues, and some listings use the names interchangeably, so ask which building the drawing matches and whether its ice surface is in use on your dates.
Charlotte: The Park Expo and Conference Center
Charlotte has no state fairground in the library, but The Park Expo and Conference Center on Briar Creek Road hosts the kind of consumer shows, gun shows and holiday markets that fairgrounds host elsewhere. Local reporting by WFAE in October 2026 describes a proposed mixed-use redevelopment of the site, with the Southern Christmas Show staying put through 2027, so ask the venue about its plans for your dates before you sign a multi-year deal.
- [The Park Expo, Liberty Hall](/venues/park-exposition-liberty-hall-charlotte/), Charlotte: the drawn plan spans about 495 x 269 feet. A second listing, Park Expo Conference Center, Liberty Hall, is drawn at about 498 x 249 feet.
- [Freedom Hall, Park Expo and Conference Center](/venues/freedom-hall-park-exposition-and-conference-center-charlotte/), Charlotte: the drawn plan spans about 214 x 254 feet, a size for a mid-size market or consumer show.
- [Park Expo Center](/venues/park-exposition-center-charlotte/), Charlotte: the drawn plan spans about 231 x 222 feet. Ask which hall this drawing covers.
How to Start a Layout From a Venue Library Plan
Each venue page in the Map D venue directory shows the plans drawn for that building, with dimensions in feet and a preview.
- Open the venue and choose the plan closest to the building you will rent.
- Select Use This Floor Plan Free and create a free account; the plan opens in the editor.
- Check it against the venue's current site plan, and add outdoor lots, tents and gates as needed.
- Block out entrances, the show office, food, restrooms, first aid and fire equipment clearances.
- Lay out numbered vendor spaces and aisles in standard sizes, with corner and end spots marked.
- Price spaces by size and location, mark which have power, and hold spots for returning vendors.
- Send the layout to the venue and the fire marshal before vendor sales open.
Running a county fair or festival on the grounds? Map D for county fairs covers vendor applications, stall sales and the public map, and a county fair vendor application gives you a form to start from. For costs, see how much it costs to rent a fairground.
Common Mistakes When Renting a North Carolina Fairground
- Booking a building without confirming heat or air conditioning for your season.
- Assuming the rental includes outdoor lots, arenas or parking without getting it in writing.
- Picking dates that collide with the grounds' own fair setup.
- Skipping a storm and lightning plan for outdoor areas in summer.
- Opening the wrong listing when a grounds, like the WNC Agricultural Center, has several plans drawn for different buildings.
- Selling vendor spaces before the fire marshal has reviewed the layout.
Where Map D Fits
Map D is event floor plan software with booth and stall sales built in. You open a venue plan, then add vendor spaces, aisles, stages and labels in the editor, and publish an interactive map that vendors and guests can use. For fairs, festivals and markets, Map D Festivals & Markets is $0 a month, with a 3.9% Map D fee on booth, stall and sponsor sales, plus $0.75 per paid ticket, on top of standard card processing (Stripe, 2.9% + $0.30). For trade shows and expos on the grounds, you can build the floor plan for one event free; publishing the map, sharing it with exhibitors and selling booths need a paid plan, and Basic starts at $3,499. Map D does not book venues, quote rates or replace the venue's official site plan, so keep the venue and the fire marshal in the loop on every revision. To see it with your own event, request a demo or build a free floor plan.
FAQ
Which fairgrounds in North Carolina have floor plans in Map D's Venue Library?
At the time of writing, the library has plans for the Agri Supply Exposition Center at the North Carolina State Fairgrounds in Raleigh, the Western North Carolina Agricultural Center in Fletcher, including its Expo Building and Davis Event Center, and the Winston-Salem Fairgrounds. It also has The Park Expo and Conference Center in Charlotte, an expo hall that hosts many of the same kinds of shows. It is not a complete list of every fairground in the state.
How much building space is there at the North Carolina State Fairgrounds?
The N.C. Department of Agriculture's booking page lists more than 300 acres and 400,000 square feet of building space for rent, across buildings such as the Agri Supply Exposition Center, the Martin and Holshouser buildings, the Jim Graham Building and Dorton Arena.
When is the best time to hold an event at a North Carolina fairground?
Spring and late fall are popular for indoor shows, and summer works for covered or indoor events if you plan for heat and storms. Avoid the weeks around each grounds' own fair, when buildings are booked or being set up: the N.C. State Fair in Raleigh runs in October, and the N.C. Mountain State Fair in Fletcher runs in September.
Are the floor plan dimensions in this article official?
No. The dimensions describe the plans drawn in Map D's Venue Library. They are a useful starting point for sketching a vendor layout, but confirm building sizes, doors, columns, utilities and outdoor areas with the venue before you sell a single space.

