Boat Show Booth Prices: How to Set Them

Boat show booth prices are usually set by space type: in-water slips priced per linear foot of slip, outdoor land displays priced per square foot, tent booths priced per square foot at a higher rate, and indoor hall space priced like a trade show booth. Prime spots, such as the end of a dock or the space by the main gate, carry a premium, and shore power and passes are sold as add-ons. To set your own rates, total your costs by area, decide what each area must earn and divide by the sellable footage. This guide walks through each step with worked examples. Every number is a planning example, not a market rate.
If you are still at the planning stage, start with our guide on how to plan a boat show, and see how to lay out a boat show for dock and land layouts. To test your numbers as you go, use the vendor fee calculator.
Why Boat Show Pricing Is Different
A boat show sells several kinds of space at once, and each has a very different cost and value:
- In-water slips: Temporary or marina docks, sized by length and width. The display is the boat itself, and buyers can step aboard.
- Land displays: Boats on trailers or cradles in a lot or on grass. Large footprints, lower cost per square foot.
- Tent booths: Covered space for electronics, engines, gear, finance, insurance and marinas. Smaller footprints, higher cost per square foot.
- Indoor hall space: At winter or convention center boat shows, space is sold much like trade show booths, with large islands for dealers.
- Mixed exhibitors: One dealer may want three slips, a land display and a tent booth, and expects one contract and one invoice.
Because of this mix, a single price per square foot rarely works. Price each area on its own costs and value, then make sure the combined package still makes sense for your largest dealers.
Step 1: Total Your Costs by Area
Split your budget into costs that belong to the water, to the land and tents, and to the whole show:
- Water costs: Marina or waterfront rental, temporary dock rental and installation, dock crew, shore power distribution, on-water security and any extra marine insurance.
- Land and tent costs: Lot or grounds rental, tent rental and flooring, lighting, electrical distribution and land security.
- Shared costs: Marketing, ticketing, parking, shuttles, restrooms, waste, staff, show office, permits, general insurance and software.
- Contingency: About 10 percent, as a planning assumption, for weather, high water and surprises.
Subtract other income, such as admission, sponsorships and parking. What remains is what space sales must cover, plus your target profit. Split the shared costs across areas in proportion to the footage or revenue you expect from each.
Step 2: Price In-Water Slips per Linear Foot
Most boat shows price slips by length, because length is how dealers and manufacturers think about boats and how marinas price dockage. Set a few rules up front:
- Charge on slip length or boat length, whichever is greater. A 36-foot boat in a 40-foot slip pays for 40 feet; a 44-foot boat that overhangs pays for 44.
- Set a minimum charge. For example, 25 feet, so small slips still cover the dock crew time they take.
- Price wide slips separately. Catamarans and large center consoles may need a double-width slip. Price it as a separate slip type, or as length times a width factor.
- Price location. End-of-dock slips, slips facing the main walkway and slips nearest the entrance sell first.
Worked Example: Slip Rates
As a planning example, suppose your water costs, plus a share of shared costs and your margin, come to $90,000, and you have 2,000 linear feet of sellable slip length across three docks. That is a base of $45 per linear foot for the show. A 40-foot slip would be $1,800, a 30-foot slip $1,350 and a 60-foot slip $2,700. If you add a 15 percent premium for the eight end-of-dock slips, a 40-foot end slip would be $2,070. Check that your premium slips do not push the average above what your dealers will pay, then adjust the base rate.
Step 3: Price Land and Tent Space per Square Foot
Land displays and tent booths are priced by area, the same way you price booths at a trade show. Our guide to pricing trade show booths covers the general method; for a boat show, apply it to each area separately.
- Outdoor land displays: The lowest rate per square foot, since the footprint is large and the cost per foot is low. Sell in blocks, such as 20 by 40 feet, so trailers and walkways fit.
- Tent booths: A higher rate, because tents, flooring, lighting and power cost more per square foot. Sell in standard sizes, such as 10 by 10 and 10 by 20.
- Indoor hall space: Price like trade show booths, with islands for large dealer displays and inline booths for accessories and services.
Worked Example: Land and Tent Rates
As a planning example, say your land area must earn $48,000 from 16,000 sellable square feet, which gives $3 per square foot. A 20 by 40 land display is 800 square feet, or $2,400. Your tent area must earn $36,000 from 3,600 sellable square feet, which gives $10 per square foot. A 10 by 10 tent booth is $1,000 and a 10 by 20 is $2,000. Add a corner premium of 10 to 20 percent, as a planning assumption, on tent booths with two open sides.
Step 4: Set Premium Locations on Purpose
Location drives value at a boat show as much as size. The slip at the head of the main dock, the land display beside the entrance and the tent corner by the food area are worth more to a dealer than a slip at the far end. Mark those spaces on the plan, price them as their own booth type or with a per-space override, and say why in your exhibitor prospectus. Our premium booth pricing page explains how to price corners, entrances and high-traffic spots without overpricing the rest of the floor.
Step 5: Price Add-Ons
Keep the base price for space and sell services separately, so a dealer with one boat on a trailer is not paying for a dealer running shore power to six slips:
- Shore power: Price by amperage, such as 30-amp and 50-amp, and cap the number available on each dock.
- Tent electricity: Price by circuit for lighting and displays.
- Exhibitor passes: Include a set number per slip or booth, and sell extras.
- Furniture and flooring: Tables, chairs and carpet for tent booths.
- Marketing upgrades: Featured listing in the show guide, banner placement or a highlighted space on the online map.
- Late fees: A higher rate after an early-bird deadline, to reward dealers who commit early.
Step 6: Write Clear Payment and Cancellation Terms
Boat shows depend on dealer inventory, which can change with manufacturer allocations. Protect the show with clear terms:
- Deposit: For example, 50 percent at contract, with the balance due 60 days before the show.
- Payment plans: Larger dealers may prefer three or four scheduled payments.
- Cancellation: A sliding refund scale, such as a full refund minus a fee up to 120 days out, 50 percent up to 60 days out and none after.
- Boat substitution: Allow a dealer to swap a boat of similar size, but require approval for anything that needs a larger slip.
- Vessel details: Collect length overall, beam and draft at booking, so you can confirm each boat fits its slip and the water depth before move-in.
Worked Example: One Dealer's Package
Using the example rates above, a dealer books two 40-foot slips, one of them at the end of the dock, a 20 by 40 land display and a 10 by 20 tent booth for electronics. The package is $1,800 plus $2,070 for the slips, $2,400 for the land display and $2,000 for the tent booth, for $8,270 in space. With two 30-amp shore power connections at an example $150 each and four extra passes at $25 each, the total is $8,670. A 50 percent deposit is $4,335. Check that a package like this looks fair next to what the same dealer pays at other shows in your region, and offer a multi-space discount if your largest dealers are close to the line.
Selling Slips and Space Online
Dealers want to see exactly which slip they are getting, how long it is and what is next to it. A to-scale map of docks and land areas, with each slip and booth priced and marked sold as it sells, answers those questions without a dozen calls. Map D's boat show software puts slips, tents and land displays on one interactive map, lets you ask for vessel length, beam and draft on the booking form and approve each order before the dealer pays, and gives each dealer a portal with their spaces, invoice and outstanding documents. It does not set your rates or manage the marina itself, so build the numbers first with the steps above.
FAQ
How much does a boat show booth cost?
There is no standard price. It depends on whether the space is an in-water slip, an outdoor land display, a tent booth or indoor hall space, plus the size of the show, its attendance and the market. In-water slips are usually priced per linear foot of slip and land or tent space per square foot, with premiums for prime locations. Build your rates from your own costs and check them against comparable shows in your region.
Should in-water slips be priced per foot of boat or per foot of slip?
Many organizers price on the slip length, with a rule that the boat's length overall is charged instead if it is longer than the slip, so overhangs are not free. Pricing on slip length is simpler and protects your inventory, because a 32-foot boat in a 40-foot slip still uses the whole slip. Publish the rule in your exhibitor contract so dealers can quote it to their manufacturers.
Why do in-water spaces cost more than land space?
Temporary docks, marina rental, dock crews, shore power, security on the water and insurance cost more per square foot than an empty parking lot or tent floor. In-water displays also let buyers step aboard a boat in its element, which dealers value. Most shows price slips higher per square foot of footprint than land space, even when land displays hold larger boats.
What add-ons should a boat show charge for?
Common add-ons include shore power by amperage, extra exhibitor passes, carpet or flooring in tents, tables and chairs, extra dock lines or fender rentals where the show provides them, signage, and boat delivery or crane service if the show coordinates it. Price add-ons so dealers who use more pay more, and cap inventory where supply is limited, such as 50-amp power on a dock.

