Skip to main content

Guide

How to Make a Festival Vendor Map: 9 Steps and a Worked Example

From a site plan to a published, bookable map: what to collect first, booth sizes, numbering, a worked three-block street fair, and how to share the map with vendors and visitors.

What a Festival Vendor Map Has to Do

A festival vendor map does three jobs. Before the event it sells space, because vendors can see exactly what they are buying and where. On the day it gets everyone where they need to be: vendors at load-in, volunteers on shift, visitors looking for food or restrooms. And it is the one drawing the fire marshal, the city and your committee all sign off on. Build it for all three and it saves you hours of phone calls.

  • Vendors use it to choose a space, find it at load-in and see who their neighbors are
  • Visitors use it to find food, restrooms, the stage and particular vendors
  • Volunteers and security use it to direct people and keep lanes clear
  • The fire marshal and site owner use it to approve lanes, exits and power

What You Need Before You Start

Gather these before you draw a single booth. Each one changes how many spaces you can sell.

What to collect before drawing the map
ItemWhere it comes fromWhy it matters
A to-scale site plan or aerial photoThe site owner, the city, a survey or an aerial imageEverything else is measured against it
Fire lane, aisle and exit requirementsYour fire department or fire marshalLanes are drawn first and cost the most space
Power and water points, with capacityThe site owner or an electricianDecides where food and powered spaces can go
Vehicle access and load-in routeSite owner, city traffic or policeVendors need to reach their space without crossing visitors
Expected vendor mix and countsLast year's list, applications, waitlistSets how many standard, double and food spaces you need
Permit and street-closure limitsCity permits officeStreet fairs often have fixed hours and closed blocks

How to Make the Map, Step by Step

  1. Set Up the Base Map to Scale

    Load a site plan or aerial photo and set the scale from a known distance, such as a street width or a building length. Check two or three distances on the ground.

  2. Mark What Cannot Move

    Entrances and exits, curbs, trees, light poles, hydrants, drains, restrooms, power and water points, slopes, and anything else that will not move on the day.

  3. Draw Lanes and Aisles First

    Draw the fire and emergency lanes, the main visitor aisles and the cross-aisles before any booth. Spaces fill what is left, not the other way round.

  4. Choose Booth Sizes

    Pick a small set of space types, such as a 10x10 ft standard, a 10x20 ft double and a food truck space, and give each a color.

  5. Lay Out the Rows

    Place spaces in rows that follow the curb or the paths, with a small gap for tent weights between canopies. Break long rows every 8 to 10 spaces so people can cross.

  6. Place Food, the Stage and Anchors

    Put food near power, water and seating, the stage near food but away from vendors who need to talk to customers, and popular anchors at the far ends so visitors walk past everyone.

  7. Number Every Space

    Number spaces in walking order with row letters (A1, A2, B1) and a separate prefix for food (F1). Hold a few back for late changes.

  8. Add Services and a Legend

    Add the info tent, first aid, restrooms, handwashing, trash and recycling, ATMs, accessible parking and the vendor load-in route, with a legend.

  9. Check It on the Ground, Then Publish

    Walk the site with the map, then publish it where vendors can see it and book. Share the same map with volunteers and visitors closer to the day.

Booth Sizes

Keep space types few. Every extra size is another price to explain and another way for the map to go wrong. These sizes are common, not fixed; size spaces to your vendors and your site.

Common festival vendor space sizes
Space typeCommon sizeUse it for
Standard10x10 ftMost craft, art, retail and farm vendors with a pop-up canopy
Double10x20 ftLarger displays, furniture, plants, demonstrations
Corner10x10 ft with two open sidesA premium space with more frontage
Food tent10x10 ft, often with powerFood vendors cooking or serving under a canopy
Food truck or trailer10x20 to 10x30 ft or moreSize to the longest vehicle, plus space for the queue and service window

For layout patterns such as a U, a loop, back-to-back rows or a grid, and a worked count of how many 10x10 spaces fit a lot, see our vendor market layout guide.

Numbering Spaces

Ways to number vendor spaces
SchemeExampleBest forWatch out for
Row letter and numberA1, A2, B1Lots, parks and fairgrounds with several rowsNumber in walking order, not drawing order
Zone prefixF1 food, C1 craft, K1 kidsFestivals with distinct areasKeep prefixes short and put them in the legend
Street and numberOak 12, Main 4Street fairs across several blocksOdd and even sides, like house numbers, help people find a space
Straight sequence1 to 80Small markets with one aisle or loopInserting a space later breaks the sequence

Worked Example: A Three-Block Street Fair

This example uses the layout from the Map D demo: a three-block street fair on a closed avenue with a food truck area by the stage. The figures are an example for planning, not a standard.

  1. Start With the Street

    Oak Ave is closed for three blocks. A 20 ft fire lane runs down the center and stays clear all day.

  2. Fit the Booths to the Block

    Between the fire lane and each curb there is room for one row of 10x10 ft spaces facing the sidewalk. Each side takes 40 spaces in four runs of 10, with a 10 ft break at each crosswalk and mid-block.

  3. Number Both Sides

    That is 80 artisan spaces, A1 to A40 on the north side and B1 to B40 on the south side, numbered west to east so both sides read the same way.

  4. Put Food Where People Stop

    A parking lot by the stage takes 15 food truck spaces of 10x20 ft in three rows of five, F1 to F15, with 20 ft between rows for queues.

  5. Add Services and Load-In

    Restrooms and first aid at each end, the info tent at the main entrance, and vendor load-in from the side streets before 8 am.

Worked example: Oak Ave street fair
ItemFigure
Artisan spaces80 at 10x10 ft (A1 to A40, B1 to B40)
Food truck spaces15 at 10x20 ft (F1 to F15)
Center fire lane20 ft clear, the full length of the closure
Example prices$250 artisan, $600 food truck
Booth sales if every space sells$29,000

PDF, Spreadsheet or Interactive Map

PDF, spreadsheet or interactive map
PDF or imageSpreadsheet plus mapInteractive map with booking
Vendors see where they will beYesOnly if you send the map tooYes, and pick the space themselves
Shows what is still availableOnly if you redraw itIn the sheet, not on the mapUpdates as spaces sell
Takes paymentNoNoYes, at checkout
Collects permits and insuranceNoBy emailWith the booking
Works on the day for visitorsAs a printoutNoOn any phone, searchable

Small markets with a fixed list of returning vendors often manage with a PDF. Once vendors are choosing spaces, paying and sending documents, an interactive map saves you matching emails, payments and spreadsheet rows by hand.

Publish and Share the Map

  • Publish the map with your vendor application, so vendors can see the spaces and prices before they apply
  • Embed it on your event website and link it from your application email
  • Send each vendor their space number, arrival window, entrance and parking area in one message
  • Share a visitor version closer to the day, with food, restrooms and the stage marked, and a QR code at each entrance
  • Print a large copy for the info tent and give volunteers the same version
Copy-ready template: Space confirmation message
Hi {Vendor name},

You are confirmed for {Event name} on {date}.

Your space: {space number} ({size}), {street or row}
Arrival window: {time} to {time}, via {entrance}
Vehicles off the street by: {time}
Vendor parking: {location}

Map: {link to the vendor map}

Please bring your {permit / certificate of insurance} and tent weights for every canopy leg.

Questions on the day: {phone}

{Your name}, {Event name}

Common Mistakes

  • Drawing booths first and fitting the fire lane in afterwards
  • Numbering in the order you drew spaces instead of the order people walk
  • Forgetting tent weights and guy lines, so canopies spill into the aisle
  • Placing food trucks with their queues across a narrow aisle
  • Selling every space, with nothing held back for late changes or a lost vendor
  • Leaving out the vendor load-in route, so vans and early visitors meet in the aisles

Map D Festivals & Markets

Build the map in about 10 minutes

Map D Festivals & Markets builds the map from a sentence, a sketch or last year's PDF, then lets vendors choose a numbered space and pay online. It is free to build, and with Stripe connected Map D's 3.9% fee, on top of standard card processing, applies only when vendors, sponsors or ticket buyers pay you.

  • Describe the layout in plain English or by voice, or upload a PDF, image or sketch of the site
  • Rows of spaces with the space size and aisle width you set, numbered with a start number and prefix
  • Booth types with their own size, price and color, for standard, double, corner and food spaces
  • Icons for restrooms, entrances, exits and first aid that visitors can search on the published map
  • Vendors pick a space and pay at checkout, or send a request you approve first

Questions

Frequently asked questions

What should a festival vendor map be based on?

Work from a site plan, a survey or an aerial photo of the park, street or fairgrounds, drawn to scale. Check a few distances on the ground with a measuring wheel, because aerial photos can be out of date or slightly distorted.

What size should festival vendor booths be?

10x10 ft is the most common outdoor space because it fits a standard pop-up canopy. Most festivals also offer 10x20 ft doubles and longer spaces for food trucks and trailers, sized to the vehicle plus room for the queue.

How wide should festival aisles and fire lanes be?

Your fire department sets them. Outdoor shopper aisles of 10 to 20 ft are a common starting point, and a lane fire engines may use is often required to be at least 20 ft clear. Get the numbers in writing before you sell spaces.

How should I number vendor spaces?

Use row letters and numbers in the order people walk, such as A1, A2, B1, and give food its own prefix, such as F1. The number should tell a vendor, a volunteer and a delivery driver where the space is.

Should the vendor map be a PDF or an interactive map?

A PDF or image is enough to show a layout. If you want vendors to choose and pay for a space, and the map to update as spaces sell, publish an interactive map with booking and checkout instead.

Start now

Build your map before your next committee meeting

It is free to build and there is no monthly fee: Map D earns its fee only when vendors, sponsors or ticket buyers pay you.